DEFENDER2.NET - View topic - remove tank and parts delivery time in France

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > remove tank and parts delivery time in France

Page 1 of 1

Print this entire topic ·

nicolas0505

Member Since: 23 Dec 2020
Location: briançon
Posts: 79

remove tank and parts delivery time in France

hello

I would like to know the time it takes to drop the tank on a 90 puma.

I have

in the tank I have changed the filters several times, emptied the filters each time I have like gelatin or black brown pieces in the diesel

the gelatin is at the fuel filter cap and the other time I had pine needles. it must come from the breather, the little one must be screwed up, I ordered the breather hose from land rover, I've been waiting for it for 1 month. they say it's the English who take a long time to deliver. Is there a problem with the supply of parts at land rover?

do they take me for a fool or what? I live in France

14th Dec 2022 3:34pm

wyvern

Member Since: 14 Dec 2009
Location: Cornwall
Posts: 2070

2012 Defender 110 Puma 2.2 XS CSW Firenze Red

Hi Nicolas
What year and model of defender 90 do you have ? 200/300 TDI, TD5, Puma 2.4/2.2 or the more modern one? Poppy - TDCI (Puma) 110XS 2.2 - Camper conversion - see the build here - https://www.defender2.net/forum/topic56530.html
Elgar -TDCI(Puma) 110XS Dormobile - now sold
Devon & Cornwall 4x4 Response - DC126

14th Dec 2022 3:52pm

nicolas0505

Member Since: 23 Dec 2020
Location: briançon
Posts: 79

I have the 90 2.4 from 2007

14th Dec 2022 3:58pm

Co1

Member Since: 19 Aug 2018
Location: North Yorkshire
Posts: 3616

I can tell you it’s a tough job to drop it. You can but a replacement cradle from YRM, then cut out the old cradle. I could get mine out any other way.

14th Dec 2022 7:35pm

matchap801

Member Since: 05 Aug 2021
Location: Somerset
Posts: 120

2009 Defender 90 Puma 2.4 CSW Zermatt Silver

I have a 2009 CSW. The breather pipe on my one was knackered.
I managed to get my fuel tank down enough to change it.
1. Drive it until the fuel light comes on.
2. Remove the fuel filler pipe - wedge some rag in the neck to stop debris falling in.
3. Remove the rear mudguards.
4. Remove the tank guard nuts that come into the Cross member. Then the 4 large bolts securing the tank guard to the chassis brackets.
5. Then using a large tyre lever and crow bar - I managed to force the tank guard forwards so that I could drop it down. Have wooden wedges available.
6. I could drop the tank down far enough to swap over the breather hose for a new one.

This whole lot took around 4 hours to remove. An hour to swap the pipe, then 4 hours to refit.

If you get a chance, prepare wash it all before, the mud and rubbish dropping down was a challenge.

I didn't take photos. Good luck. 2009 Defender 90 CSW 2.4 TDCI.
Ex Army Mechanic still living the dream.

16th Dec 2022 9:58pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum