DEFENDER2.NET - Search

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Search

Search found 51 matches

Author	Message
Retrieve object from cylinder!!!
SilverPuma 28th Oct 2023 9:01pm	Forum: Puma (Tdci) · Replies: 35 · Views: 8436 · Subject: Retrieve object from cylinder!!!
	The blank is in the pit of the dished piston so should be able to turn the crank without it fouling the head / valves. Wondering if it’s possible to “drop” a valve so there’s enough cleara ...
Retrieve object from cylinder!!!
SilverPuma 28th Oct 2023 12:26pm	Forum: Puma (Tdci) · Replies: 35 · Views: 8436 · Subject: Retrieve object from cylinder!!!
	Does anyone know the valve lift? If it’s greater than 8mm then I may have a chance with wire and magnet / compressed air through injector hole to push it out past valve (slim chance I know…) E ...
Retrieve object from cylinder!!!
SilverPuma 28th Oct 2023 10:08am	Forum: Puma (Tdci) · Replies: 35 · Views: 8436 · Subject: Retrieve object from cylinder!!!
	Hopefully my existing head should be fine. If I take the head off and obviously replace the injectors, and code them, is there anything else worth doing while I’m at it? (Timing chain etc) The D ...
Retrieve object from cylinder!!!
SilverPuma 28th Oct 2023 9:24am	Forum: Puma (Tdci) · Replies: 35 · Views: 8436 · Subject: Retrieve object from cylinder!!!
	Thanks for the replies guys. As I need to take the inlet manifold off to remove the head anyway I may as well at that stage see if I can get it out with a wire and magnet. Does anyone know how ...
Retrieve object from cylinder!!!
SilverPuma 27th Oct 2023 8:22pm	Forum: Puma (Tdci) · Replies: 35 · Views: 8436 · Subject: Retrieve object from cylinder!!!
	Unfortunately it is just slight smaller than the hole and would literally have to come out stood upright. The injector hole isn’t really and option, I wondering about extraction via exhaust or inlet ...
Retrieve object from cylinder!!!
SilverPuma 27th Oct 2023 7:56pm	Forum: Puma (Tdci) · Replies: 35 · Views: 8436 · Subject: Retrieve object from cylinder!!!
	Hi all. Today I had that feeling of dread when changing the injectors on the 2.4 TDCI. All went well until having taken the injectors out I placed the metal blanking plugs in the bottom of the injecto ...

All times are GMT + 1 Hour

Jump to

Page 4 of 4