DEFENDER2.NET - Search

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Search

Search found 56 matches

Author	Message
Galvanised chassis paint question.
paul 123 19th Apr 2024 6:28am	Forum: Technical · Replies: 9 · Views: 285 · Subject: Galvanised chassis paint question.
	when i did mine i used twash etch primer primer then 2 coats of black chassis paint.
starter inhibitor switch
paul 123 15th Apr 2024 7:43pm	Forum: Maintenance & Modifications · Replies: 3 · Views: 241 · Subject: starter inhibitor switch
	its a rebuild the inhibitor switch and gearbox were all working ok when i removed them from the disco. i need to know which wire to route through the switch. i was thinking of cutting into the starter ...
starter inhibitor switch
paul 123 15th Apr 2024 10:52am	Forum: Maintenance & Modifications · Replies: 3 · Views: 241 · Subject: starter inhibitor switch
	the question is how do i wire a starter inhibitor switch? the car is a 300tdi 90 with an autobox from a discovery.
[Sorted] Front middle seat
paul 123 2nd Mar 2024 3:56pm	Forum: For Sale & Wanted · Replies: 6 · Views: 348 · Subject: [Sorted] Front middle seat
	i have a grey one from a 300tdi its in norfolk.
Range Rover Classic
paul 123 7th Jan 2024 6:20pm	Forum: Off Topic · Replies: 14 · Views: 992 · Subject: Range Rover Classic
	i have a 1971 2 door 200tdi manual converted to a van . its a good workhorse but if it can rust it will.sills complete body side frames bulkheads and inner wings all like to rot. inner wings are avail ...
Galvanised or not
paul 123 10th Dec 2023 12:23pm	Forum: Maintenance & Modifications · Replies: 6 · Views: 777 · Subject: Galvanised or not
	any thing thats galvanized will last longer so thats the way to go. i have used all galvanized cappings on my 90 rebuild along with chassis and bulkhead.
engine height
paul 123 6th Dec 2023 9:21pm	Forum: Technical · Replies: 15 · Views: 1609 · Subject: engine height
	its the wrong fan cowl so the proper one has been ordered. the engine now sits in the right place but needs the shims. changing the chassis again is the right way to go but i am not prepared to do all ...
engine height
paul 123 6th Dec 2023 2:06pm	Forum: Technical · Replies: 15 · Views: 1609 · Subject: engine height
	i will still need the shims as if i remove them the timing cover will be too close to the steering box.just tried to fit the fan which came as a kit yhe bolt holes for the fan and mounting frame dont ...
Wing Top Chequer - Foam Gasket?
paul 123 6th Dec 2023 9:49am	Forum: Maintenance & Modifications · Replies: 11 · Views: 966 · Subject: Wing Top Chequer - Foam Gasket?
	i just pop rivited mine on
engine height
paul 123 6th Dec 2023 7:05am	Forum: Technical · Replies: 15 · Views: 1609 · Subject: engine height
	https://www.defender2.net/gallery/albums/userpics/28632/20231203_121629.jpg As it is with the wrong shroud https://www.defender2.net/gallery/albums/userpics/28632/20231205_095531.jpg
engine height
paul 123 6th Dec 2023 7:01am	Forum: Technical · Replies: 15 · Views: 1609 · Subject: engine height
	i am fitting an electric fan today. it seems that i as trying to cure to problems at once without realizing that i had two problems. the problems were the engine sitting too low on the mounts this has ...
engine height
paul 123 5th Dec 2023 12:47pm	Forum: Technical · Replies: 15 · Views: 1609 · Subject: engine height
	fitted the new gearbox cross member that sits the gearbox 10mm lower still cant fit the fan. next step was to measure another defender 300tdi . my engine is now in the correct place still the fan wont ...
engine height
paul 123 30th Nov 2023 8:41am	Forum: Technical · Replies: 15 · Views: 1609 · Subject: engine height
	a new cross member is on its way to me hopefully that will cure the problem. richards chassis are being helpful and trying hard to help with this problem. if i needed another chassis it would be from ...
engine height
paul 123 25th Nov 2023 2:56pm	Forum: Technical · Replies: 15 · Views: 1609 · Subject: engine height
	now fitted the shims they have raised the engine up but not enough to get the fan on.
engine height
paul 123 22nd Nov 2023 7:32pm	Forum: Technical · Replies: 15 · Views: 1609 · Subject: engine height
	great service the shims were here in 24 hours.now to fit them at the weekend and hope it solves the problem.

All times are GMT + 1 Hour

Jump to

Page 1 of 4