| Author |
Message |
 Puma 2.2 Nanocom outputs |
Hector Menendez
 29th Jun 2025 11:24am
|
Forum: Puma (Tdci) · Replies: 18 · Views: 1348 · Subject: Puma 2.2 Nanocom outputs |
That was the issue, hard to find without a smoke test.
I should have done that first time before trying anything else, the car runs smooth now!
Thanks for all the help everyone! |
| Puma 2.2 Nanocom outputs |
Hector Menendez
28th Jun 2025 3:51pm
|
Forum: Puma (Tdci) · Replies: 18 · Views: 1348 · Subject: Puma 2.2 Nanocom outputs |
If the 90 degree Elbow into the inlet manifold was not one of the replaced hoses then yes it is known to fail and split on its underside.
Great how to on its replacement
So after a long time a ... |
| Puma 2.2 Nanocom outputs |
Hector Menendez
23rd May 2025 4:59pm
|
Forum: Puma (Tdci) · Replies: 18 · Views: 1348 · Subject: Puma 2.2 Nanocom outputs |
I had a P01010 DTC when the air intake temperature sensor failed which is separate from the MAF on the 2.2
I’ll check this one as well! Thanks! |
| Puma 2.2 Nanocom outputs |
Hector Menendez
23rd May 2025 4:57pm
|
Forum: Puma (Tdci) · Replies: 18 · Views: 1348 · Subject: Puma 2.2 Nanocom outputs |
If the 90 degree Elbow into the inlet manifold was not one of the replaced hoses then yes it is known to fail and split on its underside.
Great how to on its replacement
Perfect! That makes ... |
| Puma 2.2 Nanocom outputs |
Hector Menendez
23rd May 2025 7:44am
|
Forum: Puma (Tdci) · Replies: 18 · Views: 1348 · Subject: Puma 2.2 Nanocom outputs |
I have the egr blanked both physically and electronically and also with no dpf.
It has to be some small leak somewhere I can’t find, maybe triggered by a slight restriction on the airbox and thatâ ... |
| Puma 2.2 Nanocom outputs |
Hector Menendez
22nd May 2025 8:08pm
|
Forum: Puma (Tdci) · Replies: 18 · Views: 1348 · Subject: Puma 2.2 Nanocom outputs |
Are you still on the standard air box and no mods to it like the impeller removed etc...,
Yes, standard air box with the impeller removed, also removed the standard intake tube and fitted a 75mm on ... |
| Puma 2.2 Nanocom outputs |
Hector Menendez
22nd May 2025 8:07pm
|
Forum: Puma (Tdci) · Replies: 18 · Views: 1348 · Subject: Puma 2.2 Nanocom outputs |
I'd say those figures appear to be in the order of what I'd expect to see..
Is your boost maxed out at that level, ie about as much as you get..?
Yes, that’s maximum boost. |
| Puma 2.2 Nanocom outputs |
Hector Menendez
22nd May 2025 6:12pm
|
Forum: Puma (Tdci) · Replies: 18 · Views: 1348 · Subject: Puma 2.2 Nanocom outputs |
Im having p01010-17, new allisport intercooler, new hoses. Just getting the Mil on heavy load under acceleration on 5th or 6th gear.
Airbox open will not trigger any code, the moment I close the top ... |
| Puma 2.2 Nanocom outputs |
Hector Menendez
22nd May 2025 5:43pm
|
Forum: Puma (Tdci) · Replies: 18 · Views: 1348 · Subject: Puma 2.2 Nanocom outputs |
Hi!I have a nanocom I just need the values so I can compare them to what I’m reading.
I just need g/s or g/h and pressure figures for the maf and rail 
Thanks! |
| Puma 2.2 Nanocom outputs |
Hector Menendez
22nd May 2025 4:35pm
|
Forum: Puma (Tdci) · Replies: 18 · Views: 1348 · Subject: Puma 2.2 Nanocom outputs |
Hi!
Anyone has the basic output values of a defender 2.2 Puma ( Maf, Map, Rail pressure ) I suspect I have low readings on the Maf sensor and I’m having MIL issues under load but can’t really fin ... |
| |
