↓ Advertise on Defender2 ↓

Home > Search
Search found 25 matches

Author Message
 LT230 Intermediate shaft O rings
Classic110

Post14th Jun 2022 11:46am
Forum: Tdi · Replies: 7 · Views: 2608 · Subject: LT230 Intermediate shaft O rings
TB back in used GL5 in the end.
 Front LT230 OutPut Housing
Classic110

Post14th Jun 2022 11:45am
Forum: Technical · Replies: 7 · Views: 1776 · Subject: Front LT230 OutPut Housing
So just to finish off this thread. Got TB back in on Sunday all OK, no leaks and vibration has gone. Very Happy
 LT230 Intermediate shaft O rings
Classic110

Post8th Jun 2022 7:53pm
Forum: Tdi · Replies: 7 · Views: 2608 · Subject: Correct Oil for TB
So today I have put the TB all back together and ready it is ready to go in the 110. The WSM states the following oil for the TB:

Transfer box LT230T
API GL4 or GL5 90 EP
MIL - L - 2105 or
MIL ...
 LT230 Intermediate shaft O rings
Classic110

Post7th Jun 2022 9:01pm
Forum: Tdi · Replies: 7 · Views: 2608 · Subject: LT230 Intermediate shaft O rings
Yes it has the crushable washer, also ordered. I took a pre load measurement before removing anything so I could use this for re-assembly, no new bearings. I found a good video on the net that showe ...
 LT230 Intermediate shaft O rings
Classic110

Post7th Jun 2022 5:26pm
Forum: Tdi · Replies: 7 · Views: 2608 · Subject: LT230 Intermediate shaft O rings
Thanks blackwolf (again). Managed to just order them from my local supplier, will be here tomorrow. Fingers crossed it will be all ready to go back in tomorrow afternoon. I took the sump cover off to ...
 LT230 Intermediate shaft O rings
Classic110

Post7th Jun 2022 10:51am
Forum: Tdi · Replies: 7 · Views: 2608 · Subject: LT230 Intermediate shaft O rings
Good morning. Well the TB is out for a number of reasons and I am In the process of replacing the Intermediate shaft front & rear O rings. No major leak from either, just as it is out. So need t ...
 Front LT230 OutPut Housing
Classic110

Post3rd Jun 2022 5:22pm
Forum: Technical · Replies: 7 · Views: 1776 · Subject: Front LT230 OutPut Housing
Just an update. Spent more time today looking and trying, but have given up. So out with the TB in the near future Big Cry . Just to confirm you can not remove/refit the T shape cover plate with the ...
 Front LT230 OutPut Housing
Classic110

Post3rd Jun 2022 7:55am
Forum: Technical · Replies: 7 · Views: 1776 · Subject: Front LT230 OutPut Housing
The H/L selector/shaft has not been touched as such. So later today I will have another go following your guidance and suggestions. As the housing is off the main box can you get the housing side pla ...
 Front LT230 OutPut Housing
Classic110

Post2nd Jun 2022 8:46pm
Forum: Technical · Replies: 7 · Views: 1776 · Subject: Front LT230 OutPut Housing
Blackwolf. Thank you for your reply. Yes the High/Low housing has been removed, but I do not know what position it was in when I removed it (hmm). As a last try I removed the output shaft and bearing ...
 Front LT230 OutPut Housing
Classic110

Post2nd Jun 2022 4:26pm
Forum: Technical · Replies: 7 · Views: 1776 · Subject: Front LT230 OutPut Housing
As per title. This was taken off to renew seal, bearing and reseal between housing and main box. Spent the last 7 hours trying to get the housing back in place! As thoughts why this is not happenin ...
 Drivetrain Vibration after 20 miles driving
Classic110

Post21st May 2022 5:23pm
Forum: Tdi · Replies: 14 · Views: 3378 · Subject: Drivetrain Vibration after 20 miles driving
So an update on this ****** vibration. Got under the Defender (after a 30mile run) earlier this week to have another look and play. What I found was a little surprising: October 2019 a new galvanis ...
 Drivetrain Vibration after 20 miles driving
Classic110

Post27th Apr 2022 8:30am
Forum: Tdi · Replies: 14 · Views: 3378 · Subject: Drivetrain Vibration after 20 miles driving
Dinnu.

I did use two oversize nuts to tighten up the brake drum before I checked any rear output bearing play. But what I did not do was to check the TB front output flange bearing/rotational play ...
 Drivetrain Vibration after 20 miles driving
Classic110

Post26th Apr 2022 1:52pm
Forum: Tdi · Replies: 14 · Views: 3378 · Subject: Drivetrain Vibration after 20 miles driving
Front and rear prop shafts removed this morning to check a few things: The front is correctly phased and the arrow marks both line up as do the rear ones. I did take two videos of the front diff fla ...
 Drivetrain Vibration after 20 miles driving
Classic110

Post26th Apr 2022 7:38am
Forum: Tdi · Replies: 14 · Views: 3378 · Subject: Drivetrain Vibration after 20 miles driving
Both props were changed in October 2019 for new ones and have covered around 16,000 miles which has been mainly road miles and no heavy off road use or towing. Had it looked at yesterday by a local s ...
 Front Drive Shaft Flange Bolts
Classic110

Post26th Apr 2022 7:33am
Forum: Tdi · Replies: 4 · Views: 1412 · Subject: Front Drive Shaft Flange Bolts
After a bit more research, it would appear that RUB500240 does fit the earlier models, but not the other way round. So FTC942 with not fit later models, I do not know the change over date. The reason ...
 
All times are GMT + 1 Hour

Jump to  
Page 1 of 2 12>



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums