 | Home > Puma (Tdci) > Seat upgrade |
 
|
|
|
| DSC-off Member Since: 16 Oct 2014 Location: North East Posts: 1356   
|
Hi,
I have not dealt with them myself, but not everyone rates Exmoor highly. Especially for customer service, 6 weeks delivery possibly being an example of this. Similarly, I have no experience with OEM developments, but their products look good and prices seem reasonable. http://www.oemdevelopments.co.uk/store/p65...ender.html |
||
27th May 2017 11:11am |
|
| churchy Member Since: 28 Jul 2011 Location: UK Posts: 236 
|
Thanks for the recommendation - spoke to Phil at oem this morning after he responded within 10mins to my email!
Very helpful - retrim kits ordered with heaters and packaged up with a cubby box in a 'deal' - hopefully dispatched today and will be all ok to fit at the weekend! Will add detail once done! Cheers |
||
|
30th May 2017 9:03pm |
|
| JOW240725 Member Since: 04 May 2015 Location: Suffolk Posts: 7876 
|
A bit late but I highly recommend Phil at OEM Developments, very helpful and great products! James
MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641 MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557 Instagram @suffolk_rovers |
||
|
30th May 2017 10:41pm |
|
| Pickles Member Since: 26 May 2013 Location: Melbourne Posts: 3755  
|
Pics, (before & after) will be mandatory,...please! Pickles. |
||
|
30th May 2017 11:00pm |
|
| Morepower Member Since: 08 Jan 2013 Location: Fife, Scotland Posts: 630 
|
I maybe fitting Recaro's to the 110 soon, So I will/might have a set of Genuine LR Highback seats available soon...
Regards Tim It doesn't matter how bad it is, It can always get worse... 2013 Bowler 110 (Sold) 2016 Bowler 90 Rally Spec (Sold) |
||
|
31st May 2017 9:49am |
|
| churchy Member Since: 28 Jul 2011 Location: UK Posts: 236
|
Seats arrived on time from Phil @oem. Followed by a courtesy email from him today to see how the fitting went at the weekend. Seats arrived with seat heaters already fitted so that was a real bonus. Fitted one seat Saturday and one Sunday and it takes some real finger power and patience when tryi to marry up the plastics strips at the base of the backrest. As the 'leather' is new it pays to spend a bit of time gently stretching it. Also the blog on the oem website is useful for when doing the bases. Other tricky bit is knowing if the headrest replacement part should be fully extended prior to fitting the new cover and foam so that it completely fills the void in the new foam. Only real way to tell that I worked out is to reach right up inside the new foam when fitted (gotta have long arms!) and combine this with gently flexing the headrest section to feel if it's adequately home.
Seats are a massive improvement on the collapsed original xs seats they replaced. If my budget was bigger I would have gone for a more expensive seat with a more gripping base but the backrest encloses someone of my size nicely so more than happy. Only down side now is that the rears look a bit tired but going to work on that this week with a deep clean!!!!! Just got the new matching cubby with higher lid to fit now. For those considering this type of change I would def recommend OEM - keen to offer help (even A at the weekend if needed) and deliver as promptly as we all want and not offer a 6 week lead time which even then could not be guaranteed.......... Before and after (without new cubby) below just for Pickles!  Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge |
||
|
5th Jun 2017 6:49pm |
|
| Pickles Member Since: 26 May 2013 Location: Melbourne Posts: 3755
|
Top Job.
Pickles. |
||
|
5th Jun 2017 11:32pm |
|
| Kit Member Since: 12 Feb 2016 Location: Shropshire Posts: 1110 
|
Very smart, i'm trying to decide which way to go with my seats at the moment as the drivers side cushion is knackered.
The OEM developments site states that the above retrim kit is only for tdci seats, whats the difference between tdci and tdi front seats as they look the same in the photos? Click image to enlarge 1993 200 Tdi 90 CSW 1956 Series 1 Hard-top 1958 Series 1 Soft-top |
||
|
5th Jun 2017 11:43pm |
|
| Stacey007 Member Since: 25 Sep 2015 Location: Cheshire Posts: 3702
|
Looks great
I've used OEM for some bits and top job 
You 'need' a padded armrest now though... |
||
|
6th Jun 2017 9:31am |
|
| churchy Member Since: 28 Jul 2011 Location: UK Posts: 236
|
Funnily enough only talking about the armrests yesterday - assume you mean thrones frommudstuff?
Kit I would give Phil @ oem a call to discuss. I kind of got the feeling that there's more on offer than what the websites shows....... |
||
|
6th Jun 2017 9:43am |
|
| Martin Site Admin Member Since: 02 Apr 2007 Location: Hook Norton Posts: 6510 
|
Count the number of posts holding the heatrest up  1988 90 Td5 NAS soft top
2015 D90 XS SW |
||
|
6th Jun 2017 9:46am |
|
| Kit Member Since: 12 Feb 2016 Location: Shropshire Posts: 1110
|
 1993 200 Tdi 90 CSW
1956 Series 1 Hard-top 1958 Series 1 Soft-top |
||
|
6th Jun 2017 2:16pm |
|
| Martin Site Admin Member Since: 02 Apr 2007 Location: Hook Norton Posts: 6510
|
Before the Puma, the headrest is on a single rectangular-ish post. Pumas have two smaller round posts.
1988 90 Td5 NAS soft top
2015 D90 XS SW |
||
|
6th Jun 2017 2:17pm |
|
| smb Member Since: 15 Jan 2013 Location: Cheshire Posts: 1232 
|
Churchy,
Have you had chance to give the seats a good testing? How do you rate them compared to the puma seats? So tempted to get these as the money for Recaros can be better put to something else like Nakatanenga Rear Wheel Carrier and a Foxwing!!! not forgetting the Nad Raised Air Intake as well. Mmmmm, who do I give my money to???? I hope SWMBO doesn't read this  |
||
|
6th Jun 2017 3:31pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
