 | Home > For Sale & Wanted > [For Sale] Retro Gearstick Collars |
 
|
|
|
| ROBBONTHEROCK Member Since: 23 Jun 2014 Location: Aberdeenshire Posts: 637   
|
Anybody interested in a set of gearstick Collars similar to the adventure Style.
Made out of ABS plastic printed on my 3d printer. I have yellow, red, black or coffee colours. Can also be painted easily with little prep. £10 incls postage within UK. The Parts are pushed together in the photos, but can be secured with a dab of modelling glue, any glue for model airplane kits will do, as long as its for glueing Styrene (the plastic used). [URL=]  Click image to enlarge[/URL] [URL=] Click image to enlarge[/URL] [URL=] Click image to enlarge[/URL] [URL=] Click image to enlarge[/URL] [URL=] Click image to enlarge[/URL] Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated  |
||
26th Mar 2017 11:50am |
|
| ROBBONTHEROCK Member Since: 23 Jun 2014 Location: Aberdeenshire Posts: 637
|
Lol, yes it is.
Could probably print them as well 
Cheers AndyR |
||
|
26th Mar 2017 6:55pm |
|
| JOW240725 Member Since: 04 May 2015 Location: Suffolk Posts: 7876  
|
Messaged on FB already
 James
MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641 MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557 Instagram @suffolk_rovers |
||
|
26th Mar 2017 8:24pm |
|
| defender9 Member Since: 12 Mar 2016 Location: Fylde Coast Posts: 1614 
|
this is proper retro
|
||
|
26th Mar 2017 9:02pm |
|
| Stiff1 Member Since: 09 Dec 2014 Location: Cornwall Posts: 578 
|
Have been thinking about making some of these.
They look a little too deep, any chance of altering the file to make them a tiny bit narrower in girth to the main shafts? Too much innuendo in that by far. |
||
|
26th Mar 2017 9:19pm |
|
| ROBBONTHEROCK Member Since: 23 Jun 2014 Location: Aberdeenshire Posts: 637
|
Hi,
They are sized to fill the channel, if i were to alter the height then they will slop about. If you mean the overall width, then i could do a special set for you after i have finished the present run. Are you looking for it to be flush with the side of the knob - oh ere missus
Cheers Andy |
||
|
26th Mar 2017 9:23pm |
|
| Stiff1 Member Since: 09 Dec 2014 Location: Cornwall Posts: 578
|
Just looking through a few pics from the Heritage and they are indeed a good match.
I'll be first to bite on here, PM me re payment instructions, thanks |
||
|
26th Mar 2017 9:49pm |
|
| ROBBONTHEROCK Member Since: 23 Jun 2014 Location: Aberdeenshire Posts: 637
|
I'm still prototyping the red one, just tweaked the model and will test, absolutely last tweak - i hope. LOL, this is proving to be ridiculously popular on FB, i was unprepared by how much interest there would be!!! Cheers Andy |
||
|
26th Mar 2017 9:54pm |
|
| adm2243 Member Since: 14 Jun 2015 Location: Mid Wales Posts: 17  
|
I'll have a set as well please - PM me how I can pay and I will sort
|
||
|
26th Mar 2017 9:57pm |
|
| smb Member Since: 15 Jan 2013 Location: Cheshire Posts: 1232 
|
Hi Andy,
Can I have a set too? I had used Ladies hair bands, but these look the proper job. Are they slightly illumescent? Please message me your payment details and I will sort out straight away. Many thanks Steve |
||
|
27th Mar 2017 12:04pm |
|
| ian series 1 Member Since: 17 Nov 2014 Location: south Posts: 3127 
|
They look good, I will have a set please.
Pm me payment details 80" 80" 86" 88" 90"
Wanted, Forward Control Anything considered. |
||
|
27th Mar 2017 12:11pm |
|
| huffhuff Member Since: 05 May 2016 Location: Home Counties Posts: 379 
|
Apologies on jumping in here. I can't quite see in the pics, but if you don't like the texture of the prints (might be a bit rough and or meshy and liney) you could pop them in an acetone bath. Simple to do with a tupperware box and some kitchen town. The results are quite impressive. Just google '3d print acetone bath'.
See difference below... Click image to enlarge TD5 Defender 90 Discovery 3 HSE |
||
|
27th Mar 2017 2:19pm |
|
| RustyM Member Since: 28 Oct 2013 Location: Africa/The Med Posts: 222  
|
PM me please as I would like a few sets please.
90 & Wolf
110 XS Previously owned SI SII SIIa SIII & Light weight (air portable) |
||
|
27th Mar 2017 3:03pm |
|
| ROBBONTHEROCK Member Since: 23 Jun 2014 Location: Aberdeenshire Posts: 637
|
Wow, i have been completely blown away with the popularity of these!!!!!
I have the printer beavering away all last night and all day today, so far I have enough transfer box collars to supply 38 sets, I'll start on the gearbox collars later tonight and print out another 38 or so. then I'll be ready to take some orders properly... I note the points above regarding an acetone bath etc, I will leave that to the individuals, for me I like them as they are, straight off the printer. when you introduce acetone bathes etc, it can be a bit fiddly to time it so they layers smooth out. I've printed these in the highest resolution I have available, which is 0.09mm layer height, so yes, layers are there, but they are hardly visible, much finer layers than the ones you have shown in your picture above (owl on the right, before the bath). I have sized these to fit on my sticks, the sticks are a hard moulding so should be good for the range of sticks out in the wild, its a snug fit on mine, so plenty of scope to open out with a Dremel on the inside to get perfection if for some reason it was too tight!!!! I'll offer a range of colours next week (or next month). I wonder how long it will take before my idea is cloned and more sets appear on eBay or FB........ Any suggestions on control of sales, I was thinking of listing on eBay so I could control stock levels and default via paypal etc, what do you reckon??? I take the hit on costs, so little impact to the buyers but makes my life a bit easier??? Cheers Andy |
||
|
27th Mar 2017 4:00pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
