 | Home > Puma (Tdci) > Blower and Air Con woes! |
 
|
|
|
| Grockle Member Since: 24 Nov 2008 Location: Peak District National Park Posts: 2266   
|
sounds like the resistor has gone,thats why it's on the highest speed 2.4 90 XS
1968 1/32 scale Britains 109 Pick up. |
||
24th Apr 2011 1:12pm |
|
| RED-DOT Member Since: 29 Jun 2009 Location: stirling Posts: 2363 
|
Deffo the resistor as it is getting full power only... 2008 RS4 gone, 123d M Sport, and a Puma 90 XS..
|
||
|
24th Apr 2011 1:17pm |
|
| degi80 Member Since: 24 Apr 2011 Location: MT Posts: 24  
|
Thanks for the quick replies!
Would this explain the ac compressor only working when the blower is on speed 1 &2 ? Thanks Mark |
||
|
24th Apr 2011 5:02pm |
|
| zeerover Member Since: 11 Jan 2009 Location: Ghent Posts: 16  
|
It is the switch that's broken, i had mine replaced.
|
||
|
24th Apr 2011 9:17pm |
|
| degi80 Member Since: 24 Apr 2011 Location: MT Posts: 24
|
Ok this gets better by the minute. Took her into the main dealer here in Malta. They confirmed that the resistor needs replacing (and charged me a €19 inspection fee). But then informed me that they don't have it in stock and will take about 3 weeks to arrive.
I asked for the price o the part and am still waiting for an answer! SO I took the Landy back, and on my way home I tried the Blower and its working on all 3 speeds! AC also working on all 3 speeds again too! so...did the little gremlins fix my landy? Main dealer doesn't know what he's doing? i dunno! but i'm really happy its working again! Mark |
||
|
26th Apr 2011 10:02pm |
|
| degi80 Member Since: 24 Apr 2011 Location: MT Posts: 24
|
AC and Blower died again!
so...back to the original suggestion of replacing the 3 speed blower resistor... Anyone knows what the part number is ? OR where i can find the actual resistor to be able to read the part number off it and eventually replace it? Regards Mark |
||
|
27th Apr 2011 11:41pm |
|
| Fifth Horseman Member Since: 08 Mar 2011 Location: Lanarkshire Posts: 322 
|
Part no for the blower resistor is - JGM500020
It's located at the back right (looking from the front) of the blower assembly. |
||
|
29th Apr 2011 7:18am |
|
| degi80 Member Since: 24 Apr 2011 Location: MT Posts: 24
|
OK So I gave the landy a quick powerwash on the weekend, and went for a drive straight after.
What do you know...Blower working and Ac working!!!! Next morning dead again...so got me thinking...burnt resistors don't come back to life.... contrary to the Dealership's €19 diagnosis "Blower resistor must be replaced (about €40 plus labour), but not is stock so wait about 4 weeks" today i went to a good auto electrician, he found a small grey plug just next to the resistor, opened it, cleaned the contacts and tightened them. And now all is ok! Thanks All!! |
||
|
3rd May 2011 7:42pm |
|
| Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6264  
|
 Click image to enlarge No if you can make it out....i only had a quick look and it started raining. The wires in the back ground up against the bulkhead which appear to enter the fan are shagged 
Before I go and have anothe look can anyone confirm what I need to do to resolve....is my wiring loom a wee bit knackered - on at 6.5 years old it ain't new but surely this shouldn't be happening?  |
||
|
2nd Jun 2017 4:37pm |
|
| Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6264
|
Fixed
This was th problem.... Click image to enlarge |
||
|
8th Jun 2017 7:59pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
