Member Since: 16 Apr 2018
Location: Essex
Posts: 56
Electric Window Conversion - how to remove the 2 bars
Hi all
I’m just adding a electric window kit to my 90 and the rubbish instructions say I have to move the two old slide rails from the old manual winder, HOW????? There are lugs at each end, do I have to drill them out?
24th Jun 2018 4:01pm
gilarion
Member Since: 05 Dec 2013
Location: Wales
Posts: 5084
Everything you need to know about fitting electric windows is here in this link with lots of pictures.
https://issuu.com/mobilecentre/docs/lrm_electric_windowsFor those who like Welsh Mountains and narrow boats have a look at my videos and photos at..
Member Since: 16 Apr 2018
Location: Essex
Posts: 56
The kit I got was really good except for the rubbish instructions. I did end up drill out the lugs on the original guides and moving them, the ones that the 2 screwdrivers are pointing at. Just used a 4mm bolt and locking nut in place of the drilled lug. They worked a treat!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
24th Jun 2018 4:17pm
