DEFENDER2.NET - View topic - Heated Windscreen Loom Route

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Heated Windscreen Loom Route

Page 1 of 1

Print this entire topic ·

adeparko

Member Since: 13 Feb 2015
Location: West Lothian
Posts: 41

Heated Windscreen Loom Route

Can anyone please help on the routing of the loom for a heated screen?

I’ve got the kit from Mobile Centre which looks great but I’m struggling on how the loom gets from the battery box to the dash?

Any help would be great

Thanks

Ade

19th Jun 2018 1:09pm

bubble

Member Since: 19 Jun 2018
Location: Warwickshire
Posts: 2

2007 Defender 90 Puma 2.4 CSW Keswick Green

is it a puma or 200-300 tai

19th Jun 2018 6:28pm

bubble

Member Since: 19 Jun 2018
Location: Warwickshire
Posts: 2

if its a puma out of battery box under floor and bring wiring back though holes were heater box is you have to remove brake to do this not as easy as old type defenders

or drill hole in corner of battery box run cables under floor mat and come up to centre with with wiring then connect back of radio loom

300 tdi loom or older out of battery box under floor the over gear box bring wiring back though back of clocks and connect up behind clocks only one wire to connect yellow

19th Jun 2018 6:36pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum