 | Home > Series Land Rovers > Putting Diddy to work |
 
|
|
|
| JeremyJ Member Since: 16 Nov 2011 Location: Aylesbury Posts: 1758  
|
 Click image to enlarge Click image to enlarge Spent the day working at an outdoor event setup, did a good job towing stuck toilet lorries out  |
||
24th Aug 2017 7:33pm |
|
| JeremyJ Member Since: 16 Nov 2011 Location: Aylesbury Posts: 1758
|
I've grown very attached to her, great little vehicle!
Really most sort the horrific oil leak though, even by Land Rover standards it's bad  |
||
|
24th Aug 2017 8:22pm |
|
| Devon-Rover Member Since: 22 Jan 2015 Location: South Devon Posts: 906 
|
I take you still have that beautiful Westlake headed six cylinder in there? Ran like a sewing machine and made for a sprightly drive, with a mountain of torque.
The only picture I have to hand is from august 2006 from the line up at the series 2 club national Click image to enlarge |
||
|
24th Aug 2017 8:35pm |
|
| mini Anaconda Member Since: 23 Aug 2016 Location: Thames Valley Posts: 715
|
I have good memories of riding in Diddy when it was a trayback, the exhaust stack behind the truck cab sounded fantastic!
I've got loads of photos of Diddy on the S2 Club Greenlane trips I organised. BORG - Bucks & Oxon 4x4 Response Group |
||
|
24th Aug 2017 8:37pm |
|
| JeremyJ Member Since: 16 Nov 2011 Location: Aylesbury Posts: 1758
|
Yes, still a 6 pot, tows very nicely.
She was a bit of a wreck when I got her, at some point I will sort the paint but it's not been a priority Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge |
||
|
24th Aug 2017 8:42pm |
|
| Trebro Member Since: 28 Jan 2016 Location: Hampshire Posts: 240 
|
I had a 109 with a 3.0 litre six pot with a Harry westlake head, god it was rapid for a series, but the fuel consumption was brutal, 100 miles per tank was the going rate!
|
||
|
25th Aug 2017 11:43pm |
|
| Barneyboy Member Since: 19 Nov 2014 Location: Oxfordshire Posts: 1583  
|
I thought I recognised the number plate this was one of the Rumsey brothers (Mark I believe) Land Rover,I remember buying a engine with a Turner head off of them a few years,really nice guys and extremely knowledgeable about Land Rovers and had a wonderful selection which they were very happy to show Tash and myself around and diddy was one of them,(very sad when I heard the news)pleased to see diddy is still going strong 👍 Paul Tash n Barney
|
||
|
26th Aug 2017 7:47am |
|
| JeremyJ Member Since: 16 Nov 2011 Location: Aylesbury Posts: 1758
|
I think (maybe wrong!) I bought the winch on her from you several years ago?
|
||
|
26th Aug 2017 1:28pm |
|
| JeremyJ Member Since: 16 Nov 2011 Location: Aylesbury Posts: 1758
|
I've got a 109" station wagon with a 3.0 Weslake in it as well, need to get that back out one day - lovely sounding engine |
||
|
26th Aug 2017 1:30pm |
|
| Barneyboy Member Since: 19 Nov 2014 Location: Oxfordshire Posts: 1583
|
Hi Jeremy I hadn't even noticed that,yes you sure did that was on my 1966 series 2a Swb when I bought it
 Paul |
||
|
26th Aug 2017 3:36pm |
|
| JeremyJ Member Since: 16 Nov 2011 Location: Aylesbury Posts: 1758
|
Click image to enlarge Finally managed to get hold of a “Landietent” - I’ll be testing it in Wiltshire next month! |
||
|
10th Jun 2018 12:03pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
