DEFENDER2.NET - View topic - Boomslang Loom replacement relay

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Boomslang Loom replacement relay

Page 1 of 1

Print this entire topic ·

Benmatt912

Member Since: 05 Jan 2014
Location: Worcestershire
Posts: 32

Boomslang Loom replacement relay

Hi all, I’ve check the forum and don’t think anyone else has asked the same question yet.
I’ve had a Boomslang loom fitted for a couple of years and it’s been brilliant, fit and forget, until this week when I noticed that the dipped headlights didn’t always come on when I tried to turn them on. After replacing the switch I checked the earth connections on the loom, which were fine, and then checked the relays. One of the relays looked like it had been on the sea bed for a couple of years. I swapped the relays over and the dipped headlights worked, but not the full beams.

So now I am trying, and so far failing, to find a replacement relay. It’s a H4458-12VDC. Does anyone have any suggestions as to where to get one from?
Thanks, Ben

Click image to enlarge

11th Mar 2018 4:27pm

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11240

2013 Defender 110 Puma 2.2 USW Orkney Grey

That looks like a standard 30amp changeover relay. I don't think the 'H4458' is useful here, as it appears on both 4 and 5 pin relays.

Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

11th Mar 2018 4:59pm

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

HELLA 007794311 12V 20/40 Amp SPDT RES Relay with Weatherproof Bracket by HELLA

11th Mar 2018 5:07pm

Benmatt912

Member Since: 05 Jan 2014
Location: Worcestershire
Posts: 32

Here is a picture of the diagram on the current relays, interestingly one is 4 pin and the other is 5 pin and only 4 of the pins are used.

Click image to enlarge

11th Mar 2018 5:14pm

Benmatt912

Member Since: 05 Jan 2014
Location: Worcestershire
Posts: 32

Sorted

Hi all, I’ve manage to get it sorted.
Thanks to LandRoverAnorak and dorsetsmith for there help.
In case anyone else in the future gets the same problem this is what I ordered:Standard relay change over 40 30 Amp 5pin R2032C-1
https://www.electricalcarservices.com/stan...OcQAvD_BwE

They seem to work so far.
Ben

14th Mar 2018 6:10pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum