↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > multi-connectors - OEM or 'small form' multi-plugs...?
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
donmacn



Member Since: 07 Nov 2017
Location: Nth Scotland
Posts: 1829

multi-connectors - OEM or 'small form' multi-plugs...?
Hi,

Seems I'm now re-wiring the whole car.... Confused 1994 300Tdi SW

As a result of fitting a Raptor console; a 'Madman' gauge; and tacho and boost gauges I'm going to be moving/relocating existing gauges.

To make the wiring as neat and 'future proof' as possible I'm going to try and make up small 'extension looms', using the correct wiring colours. Ideally I suppose, I'd like to find a source of the 'OEM' multi plugs (male and female) - specifically for the analogue clock and for the speedo and fuel gauge, so that I could plug my new wiring into the existing loom.

I think autosparks must have them, but they don't list them as separate parts. Does anyone know of any other sources?

Failing that, can anyone recommend 'small' multiplugs - 3 way and 6 way? I have a selection of econoseal and generic multiplugs using the 6.3mm terminals - but they're a bit bulky, and unecessary for the current involved.

My google powers can't be very strong tonight because I'm just not finding stuff.

Thanks as always Donald

1994 Defender 300Tdi 110 SW - owned since 2002 - 230k miles and going strong
(The 'rolling restoration' or tinkering thread: http://www.defender2.net/forum/topic58538.html )
2000 Range Rover P38 4.0L V8

in the past..
RR classic - fitted with 200Tdi
1984 RR classic - V8 with ZF auto box
1993 Discovery 300Tdi

not to mention the minis and the Type 2 VW camper...
Post #775112 26th May 2019 9:53pm
View user's profile Send private message View poster's gallery Reply with quote
LandRoverAnorak



Member Since: 17 Jul 2011
Location: Surrey
Posts: 11240

United Kingdom 2013 Defender 110 Puma 2.2 USW Orkney Grey
PaulMc of this parish seems to be able to source most LR related plugs and is very helpful. Send him a PM with details of what you need. Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia
Post #775113 26th May 2019 9:57pm
View user's profile Send private message View poster's gallery Reply with quote
donmacn



Member Since: 07 Nov 2017
Location: Nth Scotland
Posts: 1829

Thanks for that. I'll ping him a message.

As soon as I posted the message above, I found these - which are closer than anything I've found so far -but I'll see what Paul says.

https://www.autoelectricsupplies.co.uk/product/41/category/7 Donald

1994 Defender 300Tdi 110 SW - owned since 2002 - 230k miles and going strong
(The 'rolling restoration' or tinkering thread: http://www.defender2.net/forum/topic58538.html )
2000 Range Rover P38 4.0L V8

in the past..
RR classic - fitted with 200Tdi
1984 RR classic - V8 with ZF auto box
1993 Discovery 300Tdi

not to mention the minis and the Type 2 VW camper...
Post #775115 26th May 2019 9:59pm
View user's profile Send private message View poster's gallery Reply with quote
Procta



Member Since: 04 Dec 2016
Location: Sunderland
Posts: 4940

United Kingdom 
I will try and dig out a website I used for my rover metro, I wired up a few things, which used a couple of OEM plugs. I even had to replace two on the main car loom too. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back

Success is 90% Inspiration and 4 minutes Preparation # you can make it!
Post #775138 27th May 2019 1:20am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums