DEFENDER2.NET - View topic - TD5 Wiper motor removal

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > TD5 Wiper motor removal

Page 1 of 1

Print this entire topic ·

Interlet

Member Since: 10 Oct 2011
Location: Norwich
Posts: 461

1998 Defender 110 300 Tdi HT Alpine White

TD5 Wiper motor removal

Can someone explain what I need to do to disconnect the wiper motor from the rod that goes into it? I looked at the nut, and assumed it was undo nut and pull off...but it seems not, or at least, I haven't managed it yet. Is there more to it?

Click image to enlarge 1998 110 300Tdi White Hard Top

31st Aug 2017 3:55pm

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11240

2013 Defender 110 Puma 2.2 USW Orkney Grey

You need to remove the motor from its' mount and then remove a plate from the rear that secures the end of the drive tube.

This is a tdi motor but the principal is the same:

Click image to enlarge

Click image to enlarge Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

31st Aug 2017 4:14pm

Interlet

Member Since: 10 Oct 2011
Location: Norwich
Posts: 461

Ahh I see. Cheers Anorak. I'd removed it from the mount, but was perplexed by the next stage! Thanks! 1998 110 300Tdi White Hard Top

31st Aug 2017 4:17pm

diesel_jim

Member Since: 13 Oct 2008
Location: hiding
Posts: 6037

Or, if you remove the wiper arms themselves, you can pull the inner cable right out of the "tube" that runs between the wiperboxes (remove the wiper arms because the shafts will spin around a lot when you pull said cable out)

Be careful though, it's a long greasy messy thing... use rubber gloves and maybe another pair of hands to grab the end. good time to re-grease it when you reassemble it.

1st Sep 2017 7:11am

epictrail

Member Since: 21 Sep 2013
Location: High Wycombe
Posts: 395

This thread might help you

http://www.defender2.net/forum/topic46094....er+working

1st Sep 2017 8:28am

Interlet

Member Since: 10 Oct 2011
Location: Norwich
Posts: 461

Thanks guys. I didn't realise the white switch on top of it can cause the entire thing to stop working... given the motor was just still getting hot, I have a feeling I might get away with just that park switch. 1998 110 300Tdi White Hard Top

1st Sep 2017 10:06pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum