DEFENDER2.NET - View topic - Rear Door Cill Removal 2016MY 90XS Station Wagon

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Rear Door Cill Removal 2016MY 90XS Station Wagon

Page 1 of 1

Print this entire topic ·

SonicFields

Member Since: 11 Jul 2017
Location: Somewhere Else
Posts: 124

Rear Door Cill Removal 2016MY 90XS Station Wagon

I'm trying to remove the aluminium rear door cill to knock out some edge dents on the cill. The line of Phillips screws have been taken out, allowing the front edge to be lifted to remove the floor mat, but cannot seem to remove the cill itself. Is there something holding the cill at each end, requiring the side water-seals to be removed, or does it require a bit of brute force to lever it out? - any help would be appreciated.

21st Jul 2017 9:30pm

proloForêt

Member Since: 16 Mar 2017
Location: Montereau
Posts: 248

2008 Defender 90 Puma 2.4 XS CSW Java Black

Mine was gluey but easy. At the edges it is trapped a little under the trim. Remove all trim there is easy. For me I push to one edge much as possible and lift other with force...such that the metal flexbend a little. Out it come. Careful not to scratch on way out the sides, the piece is sharp edge at corners.

21st Jul 2017 9:42pm

SonicFields

Member Since: 11 Jul 2017
Location: Somewhere Else
Posts: 124

Thanks proloForêt, I will try that. I didn't want to force it if there was a connector at the ends

21st Jul 2017 9:53pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum