DEFENDER2.NET - View topic - TDI300 Sump plug and P gasket

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Tdi > TDI300 Sump plug and P gasket

Page 1 of 1

Print this entire topic ·

itolond

Member Since: 16 Jan 2016
Location: Singapore
Posts: 193

1997 Defender 110 300 Tdi SW Alpine White

TDI300 Sump plug and P gasket

Hi Forum,

i am looking to put in a magnetic sump plug in the TDI, from reading there was 2 sizes and by using a 15mm or 19mm spanner on the bolt head - sounded easy ......

my De has a 17mm head on and i measured the thread and it was ~13.7mm Dia - I am guessing either the plug was changes and/or the sump was re threaded - any pointers on this.

lastly I have been advised a 'metal' P gasket is best - i see the Bearmach ones - are these metal and quality va standard paper sets,

5th Apr 2017 3:48pm

AndyB

Member Since: 10 Nov 2016
Location: North Wales
Posts: 37

http://www.defender2.net/forum/topic53273.html

I struggled finding one without paying a lot!
Andy

5th Apr 2017 5:18pm

itolond

Member Since: 16 Jan 2016
Location: Singapore
Posts: 193

Hi Andy,

Bearmach or genetic metal? Where did u locate it?

5th Apr 2017 5:24pm

AndyB

Member Since: 10 Nov 2016
Location: North Wales
Posts: 37

I ended up making my own (as per link).
http://www.defender2.net/forum/topic53273.html
I did order a non magnetic one from eBay in case mine didn't turn out correct.

http://www.ebay.co.uk/itm/321840258251?_tr...EBIDX%3AIT

Andy

5th Apr 2017 5:47pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum