↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > New hinges and Security bolts
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
madfrankie



Member Since: 10 Oct 2016
Location: Hertfordshire
Posts: 356

England 2007 Defender 90 Puma 2.4 SW Stornoway Grey
New hinges and Security bolts
So,
Just fitted a full set of Optimil Hinges to the truck at the weekend.
I did a fair amount of research into security type bolts and nuts and have gone for the following.
The front body side of the hinge has the standard torx/Pin bolts filled with araldite.
The door side has one torx/pin and one shear head bolt.
The inside of the door has special security nuts which requires a special tool to remove it but won't be much help as half the bolts have no head!!
The rears ALL have shear head bolts and security nuts inside.
I know that these may only slow the scrotes but anything to disrupt the ease with which things can be demounted has to help.

Anyone done similar? "Of Course, Of course, I ain't asking . I'm telling!!"
Post #603301 20th Feb 2017 1:18pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums