DEFENDER2.NET - View topic - terrafirma propshaft and UJ's

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > terrafirma propshaft and UJ's

Page 1 of 1

Print this entire topic ·

Okan

Member Since: 17 Oct 2016
Location: Geneva
Posts: 138

2009 Defender 110 Puma 2.4 SW Stornoway Grey

terrafirma propshaft and UJ's

Hi!

Because of some vibrations in my transmission I decided to remove my front terrafirma DC propshaft TFDC680 to check the UJ's. The double card part is fine and rotatates smoothly. About the other joint it's another thing. It looks completly blocked. So I remove the UJ and I take a mesure. The UJ inside is 82mm x27mm. The only ref part on the UJ is A4 035 SPR. I m almost certain that they installed the wrong UJ inside. Because for exemple in my Terrafirma wide angle Propshaft TFWA1070 they are using a 80mm x 27mm with a ref A4 807 SPR. It's possible to install a 82mm in the propshaft with pain and tears but it will never works correctly and smoothly. So I cannot understand why they did it.

Now I m looking for an Uj 80mm x 27mm but with the ref on the UJ A4 807 SPR I can't find nothing on the web.

Does someone know a GKN or hardy spicer ref for 80mm x 27mm UJ?

Thanks for help[/img]

16th Nov 2016 8:20am

sabartnoc

Member Since: 28 Aug 2016
Location: Landes
Posts: 4

2010 Defender 110 Puma 2.4 SW Keswick Green

i have the same problem and i am looking for replacement centre locating ball part information as well,
mine has only been on for 20000km before failing

31st Jan 2017 2:38pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum