DEFENDER2.NET - View topic - HCU tub front bracket captivated nuts

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > HCU tub front bracket captivated nuts

Page 1 of 1

Print this entire topic ·

Bradders130

Member Since: 27 Nov 2021
Location: Southampton
Posts: 75

2012 Defender 130 Puma 2.2 HCPU Indus Silver

HCU tub front bracket captivated nuts

So I’ve just welded in some plates to the front of the 130 HCPU second hand tub, I managed to get hold of about 4 months ago. It was not easy due to the welds continually cracking due to expansion issues, but I got there in the end.
I’ve got a bit more to do tomorrow (21/06/22) and the weather is looking good, but I’m just wondering if anyone knows the official method for captivating the nuts for the brackets (KVU101420) on the front of the tub.
Here is a photo of the bracket close to its final position. It’s the hole on the vertical face and the nut is captivated somehow in the channel.

Click image to enlarge

I could just weld a stainless nut to a small piece of 1mm plate and bend it round the panel to fit, but I was wondering what the official method was and if there is a, “captive nut” available.

Here are a couple of shots of progress so far.

Click image to enlarge

20th Jun 2022 10:31pm

Oldowner

Member Since: 26 Dec 2018
Location: South west
Posts: 603

2007 Defender 90 Puma 2.4 HT Aintree Green

From memory it was a nut welded onto a plate approx 60mm x 15mm. M10?

I used to have bags of them from when Roger Young fitted cherry pickers to HiCaps about eight years ago - they removed all the new Hicap tubs and scrapped them all (they had stacks of them). I bought a new one off them for scrap value to replace my bashed one and they gave me quite literally a shopping bag full of Hicap fixings and brackets. My Hicap is long gone but I am sure I still have the bag of fixings but am away until next week.

21st Jun 2022 6:10am

Bradders130

Member Since: 27 Nov 2021
Location: Southampton
Posts: 75

Hi Oldowner, I only need the captivated/plated nut. I will PM you.

21st Jun 2022 10:39am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum