DEFENDER2.NET - View topic - Part number for Subwoofer grommet?

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Part number for Subwoofer grommet?

Page 1 of 1

Print this entire topic ·

Gasket

Member Since: 30 May 2020
Location: Manchester
Posts: 629

Part number for Subwoofer grommet?

Hi folks.

Just about to fit my factory LR/Apline sub along with one of Martin's excellent looms and have just been weighing up the cable routing.

Looking at LRAnorak's excellent thread there is a clear picture of the grommet used by LR for the sub loom... but I can't find it in any of the parts diagrams.

I'm about to order some genuine parts form my local dealer so thought I'd add it to the list.

Can anyone help with a part number?

Here is the link to LRA's picture from his thread:

Click image to enlarge

10th Aug 2022 2:09pm

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6502

2015 Defender 90 Puma 2.2 XS CSW Montalcino Red

I've never found it

1988 90 Td5 NAS soft top

2015 D90 XS SW

10th Aug 2022 2:09pm

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11240

2013 Defender 110 Puma 2.2 USW Orkney Grey

You'd have to find somebody that can measure it to be sure (it's usually inaccessible) but I think it's 276054, sealing bush, black, 6 x 41.5mm. It's one of those general purpose parts that gets used for different things in different places such as this:

https://www.ebay.co.uk/itm/363053028067?ha...olid=10049 Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

10th Aug 2022 2:28pm

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6502

It's flatter than 276054

1988 90 Td5 NAS soft top

2015 D90 XS SW

10th Aug 2022 2:34pm

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6502

Are you drilling a hole in your seat box lid or is there one there already?

1988 90 Td5 NAS soft top

2015 D90 XS SW

10th Aug 2022 2:42pm

Gasket

Member Since: 30 May 2020
Location: Manchester
Posts: 629

I was planning to drill, Martin.

It doesn't have to be an exact match but I'd rather get a LR part and I think that LRA's suggestion of 276054 would actually be cheaper for me to collect from the dealers tomorrow than to pay for a generic one to be delivered, so if 276054 would do the job then I could go with that.

PS: I've got a massive collection of hole saws but it dawns on me that I should probably pick a grommet that matches a saw I already have.

10th Aug 2022 2:52pm

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6502

OK, go for that grommet then

1988 90 Td5 NAS soft top

2015 D90 XS SW

10th Aug 2022 2:57pm

Gasket

Member Since: 30 May 2020
Location: Manchester
Posts: 629

Thanks both.

I'll give it a go.

Just called the dealer and they've added a grommet to the list for collection tomorrow.

Also found this older thread where, If I've read it correctly, it says that there is a second unused hole in the battery box that could also use this grommet to give a nice extra tap into the box.

https://www.defender2.net/forum/post725544.html

I'm going to measure it after it arrives to see what size holesaw I need. 41.5mm would be the obvious (though they're only commonly available in 41.5) but I'll wait till I have the thing in my hand.

10th Aug 2022 3:20pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum