DEFENDER2.NET - View topic - 200/30tdi inter compatibility

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Tdi > 200/30tdi inter compatibility

Page 1 of 1

Print this entire topic ·

alwoodley72

Member Since: 14 Mar 2010
Location: salisbury, wilts
Posts: 721

2008 Defender 130 Puma 2.4 HCPU Alaska White

200/30tdi inter compatibility

Hi guys, the 200 tdi defender engine in my 130 is tired, looking around my best bet for a Cost effective solution is a discovery engine from a donor disco. Now the 300 is far more plentiful, but will my defender turbo/ inlet/ exhaust gubbins fit on it to keep things kosher? I'm presuming on a 200 they definately are? I've had straight disco lumps in previous defenders and can't be doing with it all being 'not quite right'..

Many thanks in advance

Cheers. Alex 98 300 tdi 90 project
94 Range Rover vogue 4.2 lse
79 911 sc
08 130 double cab utility

28th Aug 2016 8:16pm

ickle

Member Since: 22 Jul 2010
Location: South Vendee
Posts: 1729

2008 Defender 110 Puma 2.4 CSW Alpine White

I don't know about swapping bits 200 - 300 but I know the defender / disco manifolds are different, Defender being 'high turbo' the disco being low

I don't think many parts are interchangeable 200 - 300

28th Aug 2016 8:25pm

alwoodley72

Member Since: 14 Mar 2010
Location: salisbury, wilts
Posts: 721

Yes I want my defender high turbo on the disco lump, then I keep standard exhaust and am able to change a starter motor without dislocating my wrist...!
Cheers. Alex 98 300 tdi 90 project
94 Range Rover vogue 4.2 lse
79 911 sc
08 130 double cab utility

28th Aug 2016 10:56pm

Mash

Member Since: 09 Feb 2015
Location: Guernsey
Posts: 1674

Alex

I wouldn't worry too much about the starter motor, once you remove the induction pipe from the turbo you have more than enough access to get to it, I have hands best described as shovels and I can change a starter easily. 90 wolf - Jasmin http://www.defender2.net/forum/topic39408.html
90 V8 - Maggie http://www.defender2.net/forum/topic42564.html
110 TD5 - Buggsy http://www.defender2.net/forum/topic59029.html
52HG25 lightweight https://www.defender2.net/forum/topic72342.html
D3 Hse - Fiona
Capri 2l S - Anna

Think I might have a problem............

28th Aug 2016 11:13pm

alwoodley72

Member Since: 14 Mar 2010
Location: salisbury, wilts
Posts: 721

I cursed and swore last time mash, had to take exhaust off to get it out, plus I've got all the 'right' gear so would really like to go with that rather than a Steve Parker exhaust etc etc...

Cheers! Alex 98 300 tdi 90 project
94 Range Rover vogue 4.2 lse
79 911 sc
08 130 double cab utility

28th Aug 2016 11:28pm

Fatboy Slim

Member Since: 04 Feb 2008
Location: Bridgend
Posts: 1006

Swap your manifolds, timing case etc onto the disco lump. Done a few, not difficult. Much better than piddling around with s shaped downpipes and all that palaver . Depending on the age of your 200s you might have to swap the oil filter housings to keep your oil cooler pipe threads right but that's no biggy.

Defo wouldn't go down the 300 route

31st Aug 2016 9:03pm

alwoodley72

Member Since: 14 Mar 2010
Location: salisbury, wilts
Posts: 721

Thanks fs that's what I wanted to hear, anyone know of a rotten 200 tdi disco going cheap?!?...

Cheers alex 98 300 tdi 90 project
94 Range Rover vogue 4.2 lse
79 911 sc
08 130 double cab utility

31st Aug 2016 9:50pm

Fatboy Slim

Member Since: 04 Feb 2008
Location: Bridgend
Posts: 1006

Might be worth giving CWS a bell

31st Aug 2016 10:05pm

foxyred

Member Since: 16 Jul 2016
Location: Nottingham
Posts: 227

1994 Defender 90 200 Tdi HT Montalcino Red

Ebay has a few £200-£700

31st Aug 2016 10:06pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum