↓ Advertise on Defender2 ↓

Home > Td5 > TD5 Rocker Gasket - Any other jobs at the same time
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Harry.O



Member Since: 25 Jul 2014
Location: Warwickshire
Posts: 707
United Kingdom 1989 Defender 90 300 Tdi ST Nato Green
TD5 Rocker Gasket - Any other jobs at the same time
I've got a seep of oil coming from the rocker cover, whilst I have the top off to change the seal is there anything else also worth doing to a TD5? I was thinking of the injector washers and O-rings which are fine at the moment but could be changed as a preventative measure. Perhaps injector harness O-rings also?

Thanks in advance,

Harry
Post #540799 16th Jun 2016 6:53pm
View user's profile Send private message View poster's gallery Reply with quote
landroverdiver



Member Since: 13 Jun 2009
Location: Renfrewshire
Posts: 193
Scotland 
I did the injector loom because I had to. May be worthwhile, and simple to do. I had oil in ECU red plug. Possibly a waste of money, maybe not?
Post #540803 16th Jun 2016 7:15pm
View user's profile Send private message View poster's gallery Reply with quote
Screbble



Member Since: 26 Apr 2015
Location: Lancashire
Posts: 2064
United Kingdom 2004 Defender 90 Td5 XS CSW Zambezi Silver
Yep, +1 for the injector loom with the mk1collector sealing mod Thumbs Up
Post #540807 16th Jun 2016 7:31pm
View user's profile Send private message View poster's gallery Reply with quote
mk1collector



Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6769
England 2004 Defender 110 Td5 CSW Bonatti Grey
Thumbs Up Ray
My build thread
http://www.defender2.net/forum/topic17615.html
Post #540816 16th Jun 2016 7:45pm
View user's profile Send private message View poster's gallery Reply with quote
Harry.O



Member Since: 25 Jul 2014
Location: Warwickshire
Posts: 707
United Kingdom 1989 Defender 90 300 Tdi ST Nato Green
Thanks for all the quick responses gents Very Happy I've got a genuine injector loom so will throw that in at the same time. Any more info on Mk1collector's mod?

Do I bother with injector washers and O-rings or is that tempting fate?

Harry
Post #540829 16th Jun 2016 8:13pm
View user's profile Send private message View poster's gallery Reply with quote
Fatboy Slim



Member Since: 04 Feb 2008
Location: Bridgend
Posts: 1006
Wales 
I normally do injector seals at 60-70K as a preventative measure. For the sake of an hours work it's worth doing. I change the injector hold down bolts and rocker shaft bolts as well.
Post #540843 16th Jun 2016 8:27pm
View user's profile Send private message View poster's gallery Reply with quote
Screbble



Member Since: 26 Apr 2015
Location: Lancashire
Posts: 2064
United Kingdom 2004 Defender 90 Td5 XS CSW Zambezi Silver
Ta da!

http://www.defender2.net/forum/topic37090....ector+loom

All you need to know about sealing said loom, courtesy of Ray Thumbs Up

I never considered the injector seals. Something for me to do over summer methinks. Thumbs Up
Post #540890 16th Jun 2016 9:45pm
View user's profile Send private message View poster's gallery Reply with quote
4RF RDS



Member Since: 19 Jul 2015
Location: Ottawa
Posts: 903
Canada 2000 Defender 110 Td5 XS CSW Epsom Green
The half round black rubber seal for the cam (located at the front of the engine). Often leaks with age. Change that out too. 2010 Range Rover MkIII Autobiography Super Charged (Idris)
2003 Range Rover Mk III (Desmond FitzWilliam)
2000 Defender 110 CSW TD5 (CTX)
1992 Range Rover Classic (Lizzy)
1972 Series III 300 Tdi (Stanwood)
1967 MGB GT

Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats.
H. L. Mencken (1880 - 1956)
Post #540933 17th Jun 2016 12:04am
View user's profile Send private message View poster's gallery Reply with quote
miker



Member Since: 13 Sep 2015
Location: Surrey
Posts: 1760
United Kingdom 1999 Defender 110 Td5 CSW Rioja Red
The only td5 that doesn't leak oil is the one with no oil in it - Wise old Chinese proverb.
Post #540934 17th Jun 2016 12:11am
View user's profile Send private message View poster's gallery Reply with quote
NickMc



Member Since: 01 Oct 2014
Location: Norn Iron
Posts: 1572
Northern Ireland 2006 Defender 90 Td5 HT Bonatti Grey
The cam cover /bung seal tend to be the real culprit for leaks.
Post #541678 19th Jun 2016 11:37pm
View user's profile Send private message View poster's gallery Reply with quote
Harry.O



Member Since: 25 Jul 2014
Location: Warwickshire
Posts: 707
United Kingdom 1989 Defender 90 300 Tdi ST Nato Green
Thanks for the advice guys, most appreciated, will definitely seal the loom as per MK1collector's mod before fitting it.

Could anyone advise on an appropriate type of sealant to use? I was looking at Sikaflex 512 which is not conductive but there is no info as to whether it's oil resistant.

I was planning to use RTV for the 1/2 moon on the rocker gasket and the cam seal.


For reference part no's are below:
Rocker gasket - ERR7094
Injector loom - AMR6103
Injector washers - ERR6147
Injector o-rings - ERR7004
Front cam seal - LDI100030
Injector hold down bolts - MBD100050
Rocker shaft bolts - FS106307L

Thanks,

Harry
Post #542303 22nd Jun 2016 9:46am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums