DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Gearbox levels

Page 1 of 1

Print this entire topic ·

Eau02467

Member Since: 20 May 2015
Location: Glasgow
Posts: 48

Gearbox levels

Hi all,

Just want to check I am not being stupid, decided to top up the axles gearbox etc today (did the main part of the service earlier In The month but took me a few weeks to get around to finishing the rest). Anyway started filling the gearbox and expected it to take a small amount but it took nearly 2.5 litres before the oil started to spill out of the filler hole! The gearbox doesn't have any leaks and I am guessing it has been this way since it left the factory, not impressed but before I go on a rant to dealer has anyone else come across this?

This was its first non dealer service as it has just dropped out of warranty

Edit - just saw the sticky on service of oils....looks like I have overfilled it....

13th Aug 2015 9:19pm

landy andy

Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5434

2006 Defender 110 Td5 USW Zermatt Silver

Yep. Drain, and measure the amount you put in

13th Aug 2015 9:29pm

rossy

Member Since: 29 Nov 2010
Location: Co. Roscommon
Posts: 1296

2011 Defender 110 Puma 2.4 CSW Stornoway Grey

yep 2.2 litres and not a drop more. That gearbox gets as hot as the engine in use and too much oil will damage the seals. Good luck - its a fiddly job but well worth the effort

15th Aug 2015 8:25am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum