DEFENDER2.NET - View topic - times to change clutch and flywheel TD5 90 and cost?

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > times to change clutch and flywheel TD5 90 and cost?

Page 1 of 1

Print this entire topic ·

Landydefender1

Member Since: 13 May 2015
Location: East Yorkshire
Posts: 63

times to change clutch and flywheel TD5 90 and cost?

I have had a look in the search section however being a man I can't find the answer! What I mean is my good lady always says 'have you really looked hard enough'....... Honestly I have?
So took my 90 for a service and the garage said that in a few months I will be needing a new clutch and whilst they are there may as well do the flywheel. He said that the floors need to come out and it's a long long job.
Before I go spend my very hard earned cash does any body know how long the job should take and an average price?
I have found the clutch and flywheel kit on fleebay for £387.95.........
Any advise would be really appreciated!
Cheers

30th May 2015 11:35pm

Lorryman100

Member Since: 01 Oct 2010
Location: Here
Posts: 2686

Not sure about the TD5 but I just got my Puma done in about 6 hours for £661 and some change, new AP HD clutch, slave cylinder and single mass flywheel including labour all whilst away in the tin tent using an independent.

30th May 2015 11:43pm

Landydefender1

Member Since: 13 May 2015
Location: East Yorkshire
Posts: 63

Wonder if that's the same time ... Price as a TD5? They can't be that different?......... Can they?

31st May 2015 8:15am

barbel jim

Member Since: 12 Dec 2012
Location: Northants
Posts: 1412

They work roughly on 10 hours labour I had a recent price of genuine £1480 and £1060 for a Valeo.

31st May 2015 8:58am

Landydefender1

Member Since: 13 May 2015
Location: East Yorkshire
Posts: 63

Is the TD5 that different from a Puma?

31st May 2015 9:18am

barbel jim

Member Since: 12 Dec 2012
Location: Northants
Posts: 1412

Pass never been near a puma yet ? The time is stripping everything out ,just to drop the box.You can get a valeo clutch,DMF and bearings for around £400. Genuine DMF is about £560 on its own !!!! Some take the engine out, others move it forward, others drop the box. Make sure you replace the spigot bearing at the same time.

31st May 2015 9:55am

Fatboy Slim

Member Since: 04 Feb 2008
Location: Bridgend
Posts: 1006

They're having a laugh. Td5 clutch and flywheel is a doddle to do. I used to do them in 3 hours on my own on the floor. Confident I could do one on the floor in 5 hours these days no probs.

31st May 2015 1:25pm

barbel jim

Member Since: 12 Dec 2012
Location: Northants
Posts: 1412

might be worth a trip to yours then

31st May 2015 2:04pm

Lambley

Member Since: 20 Apr 2013
Location: Mid Devon
Posts: 1435

I looked into it about 3 months ago when mine was slipping, I managed to sort it but the local garage quoted me approx 10 hours labour plus the cost of the clutch. They asked L/R about replacing it with a solid flywheel too, which I asked them to, but they said the local L/R dealer had not recommended doing this as it ended up being very noisy to the point of people returning to the dealers asking what's wrong, so stick with the dual mass.
I think it came to around £850 ish, plus there might be some seals, oils etc. They recommended Valeo parts

31st May 2015 2:54pm

Landydefender1

Member Since: 13 May 2015
Location: East Yorkshire
Posts: 63

Fatboy Slim wrote:
They're having a laugh. Td5 clutch and flywheel is a doddle to do. I used to do them in 3 hours on my own on the floor. Confident I could do one on the floor in 5 hours these days no probs.

Where in the UK are you? Will you do mine?
Cheers

31st May 2015 11:50pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum