DEFENDER2.NET - View topic - Puma Defender Instrument Panel LED Repair

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Puma Defender Instrument Panel LED Repair

Page 1 of 1

Print this entire topic ·

Ricky Chianese

Member Since: 15 May 2009
Location: Perth
Posts: 10

2008 Defender 110 Puma 2.4 SW Stornoway Grey

Puma Defender Instrument Panel LED Repair

Hi Folks

Any one out there ever had to replace blown surface mount LEDs within the Puma instrument panel?

I've had the blue bright light indicator not working for a while now and have traced the fault to the instrument cluster - all lights are working normally just the bright light dash indicator is not working. The wire going into the cluster plug is seeing 12V when brights are selected so I am assuming the LED is dead.

If anyone has done a repair, please will you advise on some tips on how to remove the instrument needles so that the PC board can be accessed on the inside face and where to purchase a replacement surface mount LED.

All suggestions welcome.

Thanks

Ricky Why do today what you can put off until tomorrow?

24th Mar 2015 12:22pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 16982

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

It may not be the LED, it could well be the driver, or just about any other component in the comuterised IPAC.

Replacing SMT devices is not trivial and, unless you have experience, I strongly suggest that you only try it if you have a spare IPAC on hand (or at least know where you can get one quickly).

24th Mar 2015 1:05pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum