DEFENDER2.NET - View topic - MY15 110 Removing door cards for sound proofing

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > MY15 110 Removing door cards for sound proofing

Page 1 of 1

Print this entire topic ·

GypsySamuraiAnt

Member Since: 31 Mar 2015
Location: Brisbane
Posts: 131

2015 Defender 110 Puma 2.2 SW Indus Silver

MY15 110 Removing door cards for sound proofing

Hi all,

Just about to add some sound proofing the the doors and was wondering how the cards are attached? I have seen some pictures and it seems there is some black sort of glue/sealant around the outside. Is that the case or do they just pop of with some force and trim removal tools?

All help appreciated

Cheers,
Ant

26th May 2015 11:13am

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 19751

Trim removal tools, one of those things 59/50 between force and care.
Protect the paint just in case in places if you need to and that should be it.
Don't forget to remove the door handle, the handle opening recess piece and the locking pin slider shroud section first.
Once off, behind there you will find sone thin foamy stuff which is pathetic sound deadening insulation stuff.
All the same carefully tease the sealant off all the way around taking care not to rip,it do you can put it back on.
The adhesive stuff is something that should* stick back on as it seems to stay sticky.

Once all of that is off your back to the bare door inners.

If your actually sound proofing them you might not need the foam bit again but that's up to you.
Don't forget some heat and a roller if you don't have enough already.

26th May 2015 11:43am

Defender2014

Member Since: 25 Aug 2014
Location: Buckinghamshire
Posts: 65

2015 Defender 110 Puma 2.2 XS CSW Santorini Black

Hi,

I found when I did mine that if you stretch the sealant it will slice easily with a sharp Stanley blade, also leaves a bit stuck to the door thus giving you a location guide when sticking the foam back on... Defender Puma 110XS SW
Kawasaki ZX9R El
Suzuki RGV250M
Honda CB250N Super Dream

26th May 2015 12:51pm

Natlas

Member Since: 20 Mar 2013
Location: West Sussex
Posts: 460

2013 Defender 90 Puma 2.2 XS CSW Aintree Green

I found that LR had already put some sound dampening on at th factory so put it all back together and left it alone.

2.2 90 XS
88" Series One
Old Norton

Minerva

26th May 2015 9:17pm

Rudski

Member Since: 13 Jul 2014
Location: Lake District
Posts: 130

Same as. Defender2014 sharp Stanley did the job

26th May 2015 10:16pm

GypsySamuraiAnt

Member Since: 31 Mar 2015
Location: Brisbane
Posts: 131

Thanks everyone greatly appreciated!

I might frame the factory sound proofing as memorabilia

27th May 2015 9:38am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum