DEFENDER2.NET - View topic - Front Mudflaps Attachment Query

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Front Mudflaps Attachment Query

Page 1 of 1

Print this entire topic ·

Enid_Puceflange

Member Since: 25 Oct 2014
Location: edinburgh
Posts: 1168

Front Mudflaps Attachment Query

Just a quick question,

I am in the process of what I had assumed would have been a quick 20 minute job

Replacing my Front Mudflaps,

After a quick inspection, the offside Mudflaps was replaced quite easy as it was attached to the holding bracket with three 8mm bolts.
Easy enough

I got round to the nearside and the bolt parts are totally different
They have a domed head on the front (tyre facing) side and what I thought was a nut on the other
side, but it's not moving. I got some mole grips onto it and fully expected it to unscrew, but all that's happened
is the domed head turned with it.
Are these some for of rivet??
Too dark to take photos now, but hoped that somebody might know what they are to aid with removal.

I will be replacing with bolts/nuts when I can get these off

I will get pics up tomorrow, but I think the Dremel will be getting an outing tomorrow!! Lol

G

27th Dec 2014 5:54pm

bob neville

Member Since: 30 Apr 2009
Location: Marbella
Posts: 3247

One of two things by the sounds of it.

First is a rivet (if the dome is totally smooth) in which case you will have to resort to the drill or a chisel to remove the head. The actual rubber flaps on my TD5 and Tdci are attached to the metal brackets with large rivets.

Second could be a dome headed screw into a rivnut. If it is this you will have a receptor for some form of screwdriver/allen key in the dome. If it is this the rivnut is spinning so secure it with your mole grips and undo the screw. Then you need to drill out the rivnut and replace it.

Bob 2015 Jaguar XE240 R Sport - goes like ....... !!
2013 Defender 90 CSW - sold
2009 Defender 110 Double Cab - sold
2001 TD5 90 CSW - offroad project - sold to a forum member
2011 Porsche Boxster - for the sunny days !

27th Dec 2014 6:13pm

Enid_Puceflange

Member Since: 25 Oct 2014
Location: edinburgh
Posts: 1168

Thanks Bob,
Either way it'll be getting some violent cutting tomorrow then

Cheers

G

27th Dec 2014 11:04pm

ickle

Member Since: 22 Jul 2010
Location: South Vendee
Posts: 1728

2008 Defender 110 Puma 2.4 CSW Alpine White

Pattern ones are nasty hammered over aluminium rivets, I cut through them with a sharp wood chisel cleaned and painted everything, then set screws and penny washers.

Keith

27th Dec 2014 11:13pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum