 | Home > Technical > Brake Calliper multispline bolt size |
 
|
|
|
| munch90 Member Since: 26 Oct 2013 Location: guildford Posts: 3558  
|
14mm I'm sure
|
||
4th Sep 2014 9:59pm |
|
| landy andy Member Since: 15 Feb 2009 Location: Ware, Herts Posts: 5433 
|
 14 mm |
||
|
4th Sep 2014 11:19pm |
|
| jimbob7 Member Since: 06 Jul 2013 Location: uk Posts: 2055 |
12 point socket
 Pov.spec,ftw. 2006, 110,TD5. |
||
|
4th Sep 2014 11:36pm |
|
| ken Member Since: 18 Aug 2009 Location: Banging Birds with my bitches !! Posts: 4328 
|
Thanks all
for some dumb reason I had 1/2 inch in my head  |
||
|
5th Sep 2014 4:12am |
|
| kevinf Member Since: 12 Apr 2011 Location: sheffield Posts: 55
|
never worked on a puma, but every tdi and td5 brake caliper bolt as been 13mm bi hex(12 point)
|
||
|
5th Sep 2014 10:11am |
|
| diesel_jim Member Since: 13 Oct 2008 Location: hiding Posts: 6047 
|
^^^^ +1
|
||
|
5th Sep 2014 10:20am |
|
| jimbob7 Member Since: 06 Jul 2013 Location: uk Posts: 2055 |
Ring spanners are 12 point,someone go looksy,I too also can't remember,other than 1 was
 tight. Pov.spec,ftw. 2006, 110,TD5. |
||
|
5th Sep 2014 10:49am |
|
| munch90 Member Since: 26 Oct 2013 Location: guildford Posts: 3558
|
wrong !!! 13mm |
||
|
5th Sep 2014 10:56am |
|
| Dave-H Member Since: 08 Feb 2011 Location: Surrey Posts: 1507 
|
Munch is correct, It is 13 mm ...
But 1/2" AF Bi-Hex [12 point] fits better Guns and Landrovers .... anything else is irrelevant. |
||
|
5th Sep 2014 11:05am |
|
| landy andy Member Since: 15 Feb 2009 Location: Ware, Herts Posts: 5433
|
Ahhhh. Yes it's the axel ends that are 14mm hex
Andy |
||
|
5th Sep 2014 11:17am |
|
| ken Member Since: 18 Aug 2009 Location: Banging Birds with my bitches !! Posts: 4328
|
So not so dumb then
Complete brake overhaul on the 50th coming up pipes callipers discs n pads and new bolts were needed |
||
|
5th Sep 2014 9:23pm |
|
| NickMc Member Since: 01 Oct 2014 Location: Norn Iron Posts: 1572  
|
13mm you are thinking of the bolts that hold the discs to the hubs which are 14mm.
|
||
|
1st Oct 2014 11:00pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
