DEFENDER2.NET - View topic - Puma bulkhead in older Defender

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Puma bulkhead in older Defender

Page 1 of 1

Print this entire topic ·

DoubleA84

Member Since: 11 Sep 2014
Location: N.Ireland
Posts: 9

1997 Defender 90 300 Tdi HT Coniston Green

Puma bulkhead in older Defender

Hi guys, new to the site but have owned and rebuild land Rovers since I was 14!
I'm thinking of building a 110 for my latest project I'd like to hear from any one that has fitted a puma bulkhead and dash to an earlier vehicle either a td5 or 300tdi.
what fits and what doesn't?? wiring wise I know the rev counter and temp gauge work from the puma ecu anyone over come this yet??
and most importantly has anyone managed to get the puma heater working??

thanks

Aaron

12th Sep 2014 5:38pm

GUM97

Member Since: 05 Feb 2012
Location: Cheshire
Posts: 3555

1997 Defender 90 300 Tdi HT Stornoway Grey

I've seen it done, but it's bloody awkward by all accounts! The best option I've seen is to to fit a Puma dash, but fit a Td5 instrument binnacle. Looked nice and seemed to work well.

An engine to TDi for!
"Land Rover- Proudly turning drivers into mechanics since 1948"

12th Sep 2014 7:08pm

NickMc

Member Since: 01 Oct 2014
Location: Norn Iron
Posts: 1566

A few people have done it now you just need to print out the diagrams and work through it. You'll need to be very competent at wiring. I think the companies that have done it commercially aren't going to share the info too freely unfortunately.

1st Oct 2014 10:56pm

jomara

Member Since: 26 Oct 2009
Location: Lanarkshire
Posts: 1755

2014 Defender 110 Puma 2.2 XS CSW Santorini Black

Hi Nick

Have a look here, it seems that they have the instruments working over in the US

http://www.defender2.net/forum/topic31443....=puma+dash

Cheers
John 2014 110 2.2TDCi XS Station wagon
1971 Bowler Tomcat 88 4.2 V8 Auto
2022 110 250D XS

1st Oct 2014 11:29pm

Fozzauk

Member Since: 05 Feb 2014
Location: Derbyshire
Posts: 267

2016 Defender 130 Puma 2.2 HCPU Santorini Black

I have a puma bulkhead and dash complete with heater box and pedals etc. I was going to fit to my td5 before it was stolen. PM me if your interested and I can send you some pictures of it.

3rd Oct 2014 5:24pm

DoubleA84

Member Since: 11 Sep 2014
Location: N.Ireland
Posts: 9

Nick, I'm an electrician so as long as I can get all the information the wiring shouldn't be a problem.
If its possible to get the heater to work as well as it does in a puma then all the other hard work will be worth while!!

6th Oct 2014 9:31pm

iceshj

Member Since: 16 Jan 2016
Location: Southampton
Posts: 28

Hello all,

I’ve just found this thread. I’m doing the same. Tdci to 300 tdi. I’m also going auto. Did anyone find a wiring diagram? Or suss out the can bus issue for the dash?

Thanks
Dave Defender 90 softop (in bits)
Range Rover Hybrid SVAutobiography
Discovery 3 HSE
Kawasaki ZX12R

14th Apr 2018 9:01am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum