Home > Maintenance & Modifications > Chequer Plate for RDX Bonnet? |
|
|
ROBBONTHEROCK Member Since: 23 Jun 2014 Location: Aberdeenshire Posts: 637 |
Hey folks,
I'm wondering if the standard Puma bonnet chequer plate will fit on an RDX bonnet, maybe need some fettling to fit?? Anybody tried that and if so how did you get on? Cheers Andy[/list] |
||
17th Aug 2014 6:29pm |
|
K9F Member Since: 12 Nov 2009 Location: Bournemouth Posts: 9610 |
It would need some serious cutting in my opinion......also it's pressed and welded at the rear edge so cutting it at the front part of the bulge may make it warp perhaps as any tension may be released.
Click image to enlarge If you go through life with your head in the sand....all people will see is an ar5e!! Treat every day as if it is your last....one day you will be right!! |
||
17th Aug 2014 10:57pm |
|
ROBBONTHEROCK Member Since: 23 Jun 2014 Location: Aberdeenshire Posts: 637 |
Ok, thanks.
Looks like my plan is doomed before it started Back to the drawing board! Cheers Andy |
||
17th Aug 2014 11:42pm |
|
SimonDavies Member Since: 15 Mar 2012 Location: Swansea Posts: 244 |
It is available. Like this From paddocks (first one I found):
http://www.paddockspares.com/pm1073b-defen...-2007.html Simon |
||
20th Aug 2014 6:04pm |
|
ROBBONTHEROCK Member Since: 23 Jun 2014 Location: Aberdeenshire Posts: 637 |
Handy enough, but if I can avoid it I will At the end of the day I'm not bothered about covering the vent part of the RDX bonnet as long as it looks neat Will give it some thought. Cheers Andy |
||
20th Aug 2014 10:34pm |
|
ROBBONTHEROCK Member Since: 23 Jun 2014 Location: Aberdeenshire Posts: 637 |
Cheers, looks viable, to me, just need to figure out how dimensionally similar to the puma bonnet the RDX one is Cheers Andy |
||
20th Aug 2014 10:36pm |
|
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis