DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > help

Page 1 of 1

Print this entire topic ·

darlek

Member Since: 27 Jan 2008
Location: england
Posts: 1

help

hi all ,new to the site and was wondering if anyone can shed light on my problem i have a 2004 110 td5 it cut out the other day and the fault was the pump in the tank ,i have replaced this and now it go,s
BUT the pump is very noisy and is pumping all the time ,if i switch the ignition on it pumps and pumps the noise is very loud ,could this be why my old one burnt out ,thanks for any help

27th Jan 2008 6:38pm

AndrewS

Member Since: 10 Apr 2007
Location: Hereford
Posts: 3707

2013 Defender 130 Puma 2.2 SW Rimini Red

Have you changed the fuel filter

28th Jan 2008 8:25pm

reggielad

Member Since: 30 Dec 2007
Location: staffordshire
Posts: 2

they are aways pumping,even with engine of but igision on,shouldnt be very noisy just a buzzing sound,your lucky yours started after pump replace,changed mine and cant get it to run again

8th Feb 2008 7:45pm

Fatboy Slim

Member Since: 04 Feb 2008
Location: Bridgend
Posts: 1006

Reg, you will probably have to programme the pump into the ecu.

Darlek, your pump should not pump all the time, should timeout after a few seconds when the ignition is turned on and the engine isnt started. Can you hear a loud hissing noise around the o/s/r wheelarch?

9th Feb 2008 12:23am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum