↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Clutch Advice Please!
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
dilukabey



Member Since: 17 May 2011
Location: Sri Lanka
Posts: 173
2009 Defender 110 Puma 2.4 SW Keswick Green
Clutch Advice Please!
I have a 2009 puma and my clutch was changed when it was around 17k but now again i am getting this bad rattling i suppose from the clutch at 45k. Also i noticed sometimes it slips the 1st gear. So now i thought of changing the clutch p.n LR012199.
Since it has done less mileage for a new clutch kit replacement, could i just survive by swaping just the clutch only or should i replace the whole kit?

Cheers. Smile

Kind regards,
Diluk
Post #276801 26th Oct 2013 5:43am
View user's profile Send private message View poster's gallery Reply with quote
dondiddy



Member Since: 13 Nov 2012
Location: Hamilton
Posts: 224
Scotland 1998 Defender 90 300 Tdi ST Nato Green
Hi Diluk,
Given the work involved I would change the whole clutch kit and not just the clutch plate. Its false economy to replace just the plate on its own as you could have problems later on with clutch drag for instance by the fact the clutch cover has done lots more miles that the drive plate. Also if it has been suffering from clutch slip the cover is likely to have suffered heat damage and could be warped leading to a judder when pulling away! Hope this helps! Regards
Donald
Post #276835 26th Oct 2013 10:23am
View user's profile Send private message View poster's gallery Reply with quote
dilukabey



Member Since: 17 May 2011
Location: Sri Lanka
Posts: 173
2009 Defender 110 Puma 2.4 SW Keswick Green
Many thanks for your valued info Donald. Appriciate that! So i think i better off getting the whole kit.

As far as i know you need to buy the the plate, the cover which refers the clutch kit part no as LR012199.
But then how about the bearing? Microcat says input shaft bearing part no.LR004390. Then another related part is clutch slave cylinder part no LR031455. Are they both related? Should i buy either just the bearing or the slave cylinder?

Appriciate your replys. Cheers. Smile

Kind regards,
Diluk
Post #276975 26th Oct 2013 6:33pm
View user's profile Send private message View poster's gallery Reply with quote
Dieselhead



Member Since: 21 Oct 2012
Location: Pulborough. West Sussex
Posts: 552
Replace the whole lot.

You only want to strip it once Thumbs Up Chris

2008 XS 110 2.4 Utility. Tonga Green
1953 Series 1 for restoration
1983 Mini Mayfair
2004 VW T5 Camper
2008 Diahatsu Sirion. Thats hers
Classic Bolens Garden Tractors
Post #276981 26th Oct 2013 7:03pm
View user's profile Send private message View poster's gallery Reply with quote
dondiddy



Member Since: 13 Nov 2012
Location: Hamilton
Posts: 224
Scotland 1998 Defender 90 300 Tdi ST Nato Green
Hi Diluk, Sorry for not replying sooner but I have been on holiday for the last couple of weeks so havn`t been near a computer. Sound advice from dieselhead as you really want to replace everything at the same time to avoid having to take it all apart again in the future when a reused part ends up failing.
Post #281652 12th Nov 2013 8:20pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums