DEFENDER2.NET - View topic - Tow bar electrics

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Tow bar electrics

Page 1 of 1

Print this entire topic ·

Camelrock

Member Since: 16 Aug 2012
Location: North Yorkshire
Posts: 1

2009 Defender 90 Puma 2.4 HT Bonatti Grey

Tow bar electrics

I'm fitting S electrics to a 09 def. On the new loom there is a connector with a pink/blue and yellow/brown wire, this is supposed to connect to the N electric's loom at the n/s/r but there is no connector there, just loose wires there colours being purple, green/brown then higher up another purple with a blank in it then two red/yellow which are connected within the loom. Both the N and S looms are gen L/R and the S kit is for post 07 defenders. I've looked at an 07 and 08 def with single electrics on them and the have the same N electrics loom as the 09 . So does anyone know which wires connect to which ???

10th May 2013 10:26am

ericvv

Member Since: 02 Jun 2011
Location: Near the Jet d'Eau
Posts: 5816

2009 Defender 110 Puma 2.4 SVX Station Wagon Santorini Black

Below link is actually from Bob Neville here on the forum. Hope helps.

http://www.westerntowing.co.uk/acatalog/Tr...agram.html You never actually own a Defender. You merely look after it for the next generation.
http://youtu.be/yVRlSsJwD0o
https://youtu.be/vmPr3oTHndg
https://www.youtube.com/watch?v=_GtzTT9Pdl0
https://www.youtube.com/watch?v=ABqKPz28e6A
https://www.youtube.com/watch?v=rLZ49Jce_n0
https://www.youtube.com/watch?v=XvAsz_ilQYU
https://www.youtube.com/watch?v=K8tMHiX9lSw
https://m.youtube.com/watch?v=dxwjPuHIV7I
https://vimeo.com/201482507
https://www.youtube.com/watch?v=ZSixqL0iyHw

10th May 2013 10:35am

Mr Didot

Member Since: 05 Oct 2013
Location: West Sussex
Posts: 10

2013 Defender 90 Puma 2.2 XS CSW Baltic Blue

tow bar installation and electronics

I am adding this to the related thread for others.

Got a second hand Land Rover tow bar off eBay for £50 delivered to the house last week and fitted it today

Click image to enlarge

Unlike others I really struggled to find the loom socket so have added a photo as I may not be the only one

Click image to enlarge

Made sure the plastic fastener was put back in position after connecting the male and female connections - the are other reasons for the rattles

Click image to enlarge

The cable is not too neat coming out from under the plastic shroud but will sort this later

Click image to enlarge

Now assembled it needs a last coat of paint and some more ACF 50 on the bolts and nuts. Not happy about the cable but will make it safe later

Click image to enlarge

27th Oct 2013 8:36pm

MartinK

Member Since: 02 Mar 2011
Location: Silverdale (Lancashire/Cumbria Border)
Posts: 2664

2011 Defender 110 Puma 2.4 USW Orkney Grey

great post Defender "Puma" 2.4 110 County Utility (possibly the last of the 2.4's)

28th Oct 2013 10:29am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum