DEFENDER2.NET - View topic - Defender puma wiring problem not comunicating to ecu

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Defender puma wiring problem not comunicating to ecu

Page 1 of 1

Print this entire topic ·

lrov110

Member Since: 26 Apr 2012
Location: Torquay
Posts: 4

2009 Defender 110 Puma 2.4 SW Orkney Grey

Defender puma wiring problem not comunicating to ecu

Hi guys,
Have a slight problem, driving home the engine went into limp home mode. When i started the car again it would run for a couple of km then do exactly the same thing. Abs and traction control lights would stay on, now seems to be getting worse on idle it would just die.
Checked all obvious connections under seat dash and to the ecu sprayed with contact cleaner etc battery leads and earths seem to be fine. Now at a loss on what to do next thinking maybe it could be the computer? or a split wire somewhere in the line???

Fault codes
p1935:Brake switch
p068a:Engine control power relay
p0606:Engine processor
p0404:Exhaust gas
u0155:lost comminication with instrument cluster
p1103: Mass air flow

Any addvice would be much appreciated
Thanks

4th Apr 2013 9:33am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum