↓ Advertise on Defender2 ↓

Home > Technical > What's it called? Battery post fixing bolt?
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Odin



Member Since: 29 Apr 2011
Location: Aberdeenshire
Posts: 237
Scotland 2012 Defender 110 Puma 2.2 USW Santorini Black
What's it called? Battery post fixing bolt?
I'm trying to earth a winch cable via the battery earth but the 6mm bolt with the 't' end upon which the tapered nut screws to tighten the battery clamp is too short. Only 2mm protudes above the top of the fixing nut. I'm after a longer one so I have enough thread to screw the other cable on. Hope that makes sense!

But, what the hell is that type of bolt called?
Post #179836 28th Oct 2012 7:38pm
View user's profile Send private message View poster's gallery Reply with quote
bob neville



Member Since: 30 Apr 2009
Location: Marbella
Posts: 3247
Spain 2001 Defender 90 Td5 SW Epsom Green
I had the same problem when fitting the winch on my 110.

I got round it by getting the correct size bolt and then grinding the head down to form the 'T' using a bench grinder.

Bob 2015 Jaguar XE240 R Sport - goes like ....... !!
2013 Defender 90 CSW - sold
2009 Defender 110 Double Cab - sold
2001 TD5 90 CSW - offroad project - sold to a forum member
2011 Porsche Boxster - for the sunny days !
Post #179852 28th Oct 2012 8:16pm
View user's profile Send private message View poster's gallery Reply with quote
Odin



Member Since: 29 Apr 2011
Location: Aberdeenshire
Posts: 237
Scotland 2012 Defender 110 Puma 2.2 USW Santorini Black
That's a good idea. What's that type of head called? Not even wiki can help!
Post #179861 28th Oct 2012 8:34pm
View user's profile Send private message View poster's gallery Reply with quote
bob neville



Member Since: 30 Apr 2009
Location: Marbella
Posts: 3247
Spain 2001 Defender 90 Td5 SW Epsom Green
If memory serves me it is a T head bolt, normally used for fixing aluminum extrusions.

http://www.acsstainless.co.uk/content/view/17/38/

Bob 2015 Jaguar XE240 R Sport - goes like ....... !!
2013 Defender 90 CSW - sold
2009 Defender 110 Double Cab - sold
2001 TD5 90 CSW - offroad project - sold to a forum member
2011 Porsche Boxster - for the sunny days !
Post #179874 28th Oct 2012 9:04pm
View user's profile Send private message View poster's gallery Reply with quote
leeds



Member Since: 28 Dec 2009
Location: West Yorkshire
Posts: 8578
United Kingdom 
Alternative is a battery clamp with a 8 mm stud. It is possible to fit up to 4 35 mm2 cables onto the stud terminal.


Brendan
Post #179877 28th Oct 2012 9:10pm
View user's profile Send private message View poster's gallery Reply with quote
Odin



Member Since: 29 Apr 2011
Location: Aberdeenshire
Posts: 237
Scotland 2012 Defender 110 Puma 2.2 USW Santorini Black
leeds wrote:
Alternative is a battery clamp with a 8 mm stud. It is possible to fit up to 4 35 mm2 cables onto the stud terminal.


Brendan


Cheers Brendan,

I got that gear from Dave Bowyers however the new 110 has a nicely made up cable connection that's all protected - don't want to risk cutting back the rubber to remove the existing clamp when this t-head bolt may do the job.
Post #179945 28th Oct 2012 11:12pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums