↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > 2012 90 - engine malfunction light and limp mode (P0101)
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Aus 90



Member Since: 20 Mar 2019
Location: Perth
Posts: 2
Australia 2012 Defender 90 Puma 2.2 SW Fuji White
2012 90 - engine malfunction light and limp mode (P0101)

Click image to enlarge
Hi all,

Long story short. My 2012 2.2l Defender 90 went into limp mode and showed the MIL light on the dash.

I checked all the hoses, MAF sensor, changed air and fuel filters and cleared the code on my nanocom.

Went for a drive and could hear a hissing noise and MIL light came back on the dash and limp mode.

Finally got a chance to have a good look around again today and found this. Split down the intercooler weld.

Any recommendations for a replacement? LR, BAS, Allisport etc. I don't have a remap.

Many thanks

Paul
Post #764429 20th Mar 2019 9:41am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums