↓ Advertise on Defender2 ↓

Home > Technical > Injector harness plug/socket
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
razz



Member Since: 02 Oct 2015
Location: norfolk
Posts: 403
2001 Defender 90 Td5 PU Caledonian Blue
Injector harness plug/socket
Evening all , my injector plug or socket depending how you view it , has melted at some point and no longer clips to the injector harness plug , can these be brought separately or is it a complete engine loom ? Cheers


Click image to enlarge
Post #732983 4th Oct 2018 8:49pm
View user's profile Send private message View poster's gallery Reply with quote
annette



Member Since: 24 Nov 2017
Location: Tilarán, Costa Rica
Posts: 68
Costa Rica 
Excellent question.

I had to buy a whole 2nd hand loom once and want 5 of these. In most cases, you can repair them with Poxypol or such like.
But sometimes they are beyond repair

Any bulk order I am in Fixing Land Rovers in rural Guanacaste
Post #732988 4th Oct 2018 9:09pm
View user's profile Send private message View poster's gallery Reply with quote
Martin
Site Admin


Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6478
United Kingdom 2015 Defender 90 Puma 2.2 XS CSW Montalcino Red
One for PaulMc - you need the opposite one to the one he IDd here:

http://www.defender2.net/forum/post732594.html#732594  1988 90 Td5 NAS soft top
2015 D90 XS SW
Post #733041 5th Oct 2018 8:43am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Snorkers



Member Since: 10 Oct 2015
Location: Grampian
Posts: 34
Scotland 2007 Defender 110 Puma 2.4 HT Keswick Green
Hi Razz.

I had a similar problem with the injector loom connections on my 2007 2.4 Defender. Someone had previously disconnected the loom from the injectors and obviously didn't know how to unclip them. As a result the securing clips were broken and the connectors were secured to the top of the injectors with small tie wraps. I was gutted, thinking I would have to fork out for a new injection harness. Fortunately when I was looking these up on the internet, I stumbled on some threads regarding un-pinning wiring loom connectors.

A quick trip to my local scrapyard (good old fashioned one where you can wander about) and I was able to source the same connectors from a different vehicle. (Think it was a Nissan?) I then defender pinned them from the donor car and fitted them to the Landy loom. Not sure who makes the connector that your after, but I'm almost certain that you will be able to UN pin it and replace it in situ. For all the years that I'd been messing about with cars and bikes, I'd always thought the factory looms were permanently fastened to the connectors. Talk about a 'light bulb' moment.

It may be that you were already aware the connector could be removed, but it's worth mentioning for the benefit of other who will perhaps stumble onto this thread whilst looking for help re connectors. Very Happy

Regards as always
Snorkers
Post #733166 5th Oct 2018 7:48pm
View user's profile Send private message View poster's gallery Reply with quote
razz



Member Since: 02 Oct 2015
Location: norfolk
Posts: 403
2001 Defender 90 Td5 PU Caledonian Blue
cheers everyone , i`ll do some searching and see what i can find

ady
Post #733284 6th Oct 2018 11:54am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums