↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > fitting new chassis: problems to solve
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
millepet



Member Since: 01 Apr 2013
Location: Wijnendale
Posts: 33
Belgium 2009 Defender 110 Puma 2.4 SW Orkney Grey
fitting new chassis: problems to solve
I had an accident with my 110 SW MY2009, and need to put a new chassis under the car (Richards galvanised one).
I am ready to lift the body, but the bulkhead does not move after removing the 2 big bolts running through the chassis and the bulkhead (and all the other bodyfixings to the chassis). Any advice is welcome.

Click image to enlarge
Post #731077 25th Sep 2018 12:46pm
View user's profile Send private message View poster's gallery Reply with quote
Mash



Member Since: 09 Feb 2015
Location: Guernsey
Posts: 1674
Guernsey 1998 Defender 90 300 Tdi HT Nato Green
Each footwell has two bolts bolted to the chassis via a bracket. Depending what damage you have done it could of twisted around the bulkhead mounting, when I fitted mine I had to splay the bulkhead with a bottle jack to align the bolts, it could just be it’s now held on via friction alone.

Oh always triple check for earth straps as they can test the load limit of the kit you are lifting with Rolling with laughter 90 wolf - Jasmin http://www.defender2.net/forum/topic39408.html
90 V8 - Maggie http://www.defender2.net/forum/topic42564.html
110 TD5 - Buggsy http://www.defender2.net/forum/topic59029.html
52HG25 lightweight https://www.defender2.net/forum/topic72342.html
D3 Hse - Fiona
Capri 2l S - Anna

Think I might have a problem............
Post #731198 25th Sep 2018 8:28pm
View user's profile Send private message View poster's gallery Reply with quote
GREENI



Member Since: 22 Aug 2010
Location: staffs
Posts: 10358
United Kingdom 
Here's what to look for



Click image to enlarge
Post #731275 26th Sep 2018 7:04am
View user's profile Send private message View poster's gallery Reply with quote
NickMc



Member Since: 01 Oct 2014
Location: Norn Iron
Posts: 1568
Northern Ireland 2006 Defender 90 Td5 HT Bonatti Grey
Have you got the two bolts under the lip of the seatbox mat I’d describe them as the “saddles” ? Either side of the tunnel in the rectangular cut outs in the floor. Lot more brackets and bolts on a CSW.
Post #731433 27th Sep 2018 12:33am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums