DEFENDER2.NET - View topic - Inlet Manifold hose change without removing any water pipes

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Inlet Manifold hose change without removing any water pipes

Page 1 of 1

Print this entire topic ·

Martin.wood300

Member Since: 15 Jun 2018
Location: U.K.
Posts: 7

2013 Defender 90 Puma 2.2 HT Alpine White

Inlet Manifold hose change without removing any water pipes

Hi, massive turbo whistle the other day. Eventually found a split in the 90 degree pipe from intercooler (after metal section) to inlet manifold. I manage to remove it without removing any of the obstructing water pipes etc. I then spent all day trying to refit a new one and I gave up with hands of agony and blood. Please tell me someone else has fallen short here too, or any tips? or should we just drain coolant system and remove water pipes for access? May of been quicker!?

4th Aug 2018 9:27pm

ian series 1

Member Since: 17 Nov 2014
Location: south
Posts: 3127

2008 Defender 90 Puma 2.4 CSW Bonatti Grey

It is possible to change them, but your right, it’s a pig of a job! but like most things on the TDCI,
It’s easier and quicker to strip and refit surrounding parts to get the job done with much less hassle

80" 80" 86" 88" 90"

Wanted, Forward Control Anything considered.

4th Aug 2018 9:47pm

Big Harold

Member Since: 09 Jul 2018
Location: nsw
Posts: 71

2015 Defender 130 Puma 2.2 HCPU Alpine White

Don't replace it with anything other than a silicon hose or you will be doing it again in another 60000.

5th Aug 2018 11:52pm

Martin.wood300

Member Since: 15 Jun 2018
Location: U.K.
Posts: 7

as a matter of interest, can if be driven with this pipe off? I know the air isn't filtered etc and it wont have any power, but will it still go? ordered nice 5 ply silicone ones, cant wait....

6th Aug 2018 4:55pm

Roy5695

Member Since: 15 Feb 2014
Location: Cornwall
Posts: 1123

2011 Defender 110 Puma 2.2 XS DCPU Indus Silver

It can be done in situ, boiling water soak for the pipe and washing up liquid smeared on the inner lip. 4 elbows and 2 wrists and you’re there. My wife got mine on in the end 😂😂

She could hear me chuntering from the kitchen apparently

2011 Defender DCPU 2.2 - https://www.defender2.net/forum/topic30623.html

Instagram - @r22oyp

Roy

6th Aug 2018 7:43pm

Big Harold

Member Since: 09 Jul 2018
Location: nsw
Posts: 71

Martin.wood300 wrote:
as a matter of interest, can if be driven with this pipe off? I know the air isn't filtered etc and it wont have any power, but will it still go? ordered nice 5 ply silicone ones, cant wait....

I wouldn't asking for trouble.
Will be in limp mode as well.
When I did mine the local mechanic sent the apprentice and a roll of duct tape.
Promptly got sent on his way.
Mark

6th Aug 2018 10:06pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum