Home > Technical > Which exhaust do I have? |
|
|
Devon-Rover Member Since: 22 Jan 2015 Location: South Devon Posts: 906 |
I would hazard a guess at an ESR4527 with the flange cut off and two slits stuck into to act as a clamped arrangement and maybe a little trimmed off the other end to keep in tidy without sticking too far out. Also can be found on Fb, Ytube, Insta & Twitter @4WDSouthwest
|
||
24th Jun 2018 5:22pm |
|
jst Member Since: 14 Jan 2008 Location: Taunton Posts: 7683 |
2.5 petrol? Cheers
James 110 XS Utility 130 Puma Station wagon/camper (in the making) 90 Puma Hardtop |
||
24th Jun 2018 7:15pm |
|
mini Anaconda Member Since: 23 Aug 2016 Location: Thames Valley Posts: 715 |
Thanks guys... it looks like it is ESR4527 with the end cut off. I have ordered one and will report back when I fit it! BORG - Bucks & Oxon 4x4 Response Group
|
||
25th Jun 2018 1:51pm |
|
mini Anaconda Member Since: 23 Aug 2016 Location: Thames Valley Posts: 715 |
Bit of a late reply but you were spot on with your advise, thanks. BORG - Bucks & Oxon 4x4 Response Group |
||
9th Sep 2018 8:11pm |
|
Maxxed_Ross Member Since: 06 Jun 2012 Location: Bathgate / North Sea Posts: 340 |
that's handy to know, as that's the same rear section as I currently have with the same issues you did
I thought I was going to be forced down the expensive custom route to get the side exit back where I wanted it again 2013 Discovery 4 HSE Lux | 2001 Defender 90 TD5 | 2007 Prodrive RB320 |
||
9th Sep 2018 8:20pm |
|
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis