DEFENDER2.NET - View topic - Toylander accelerater from mobility scooter? How

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Off Topic > Toylander accelerater from mobility scooter? How

Page 1 of 1

Print this entire topic ·

Stacey007

Member Since: 25 Sep 2015
Location: Cheshire
Posts: 3693

Toylander accelerater from mobility scooter? How

Click image to enlarge
Hello

Finally trying to sort the electrics out. The mobility scooter has a wigwam style hand control .

I would like to make this as easy as possible to a pedal... Easy just choose the reverse bit off? Attach a plate to handle and fit to floor... However how do I then enable it to go in reverse?

I would rather not have a heal and toe pedal but that would make life easy?

Any suggestions please

Click image to enlarge

25th May 2018 1:24pm

grafty99

Member Since: 15 Aug 2012
Location: North Devon
Posts: 4784

Normal pedal with a loop on the top to hook with your foot and pull for reverse? 2002 90 Td5 Station Wagon
1990 Vogue SE
Triumph Tiger Explorer 1200
Td5 90 Thread http://www.defender2.net/forum/topic50767.html
Tdi 110 Thread https://www.defender2.net/forum/topic69562.html
RRC Thread http://www.defender2.net/forum/topic54492.html
Instagram http://www.instagram.com/george_grafton

28th May 2018 7:36am

grafty99

Member Since: 15 Aug 2012
Location: North Devon
Posts: 4784

Ignore the rubbish drawing on my phone but this is the thought I was trying to get across.

Loop or similar on the top perpendicular to the pedal face. Press the pedal for forwards then slide your foot up slightly and pull for reverse

Click image to enlarge 2002 90 Td5 Station Wagon
1990 Vogue SE
Triumph Tiger Explorer 1200
Td5 90 Thread http://www.defender2.net/forum/topic50767.html
Tdi 110 Thread https://www.defender2.net/forum/topic69562.html
RRC Thread http://www.defender2.net/forum/topic54492.html
Instagram http://www.instagram.com/george_grafton

28th May 2018 7:40am

grafty99

Member Since: 15 Aug 2012
Location: North Devon
Posts: 4784

Another option as it's only a 3 wire potentiometer is a single pole double throw switch (cue another poor phone drawing

) 2002 90 Td5 Station Wagon
1990 Vogue SE
Triumph Tiger Explorer 1200
Td5 90 Thread http://www.defender2.net/forum/topic50767.html
Tdi 110 Thread https://www.defender2.net/forum/topic69562.html
RRC Thread http://www.defender2.net/forum/topic54492.html
Instagram http://www.instagram.com/george_grafton

28th May 2018 7:44am

grafty99

Member Since: 15 Aug 2012
Location: North Devon
Posts: 4784

Click image to enlarge

Edit:

Actually, that might not work if it's a dead centre pot. It would need to be slightly different.

Click image to enlarge

This second one is what you'd need for selectable forward and reverse. You send the forward signal from the forwards portion of the potentiometer to either the forwards for reverse portion of the controller depending on which wire you send the signal down

2002 90 Td5 Station Wagon
1990 Vogue SE
Triumph Tiger Explorer 1200
Td5 90 Thread http://www.defender2.net/forum/topic50767.html
Tdi 110 Thread https://www.defender2.net/forum/topic69562.html
RRC Thread http://www.defender2.net/forum/topic54492.html
Instagram http://www.instagram.com/george_grafton

28th May 2018 7:46am

dorsetsmith

Member Since: 30 Oct 2011
Location: South West
Posts: 4554

Toylander club site

https://www.google.com/search?q=Toylander+...Mfw653giM:

28th May 2018 8:02am

Stacey007

Member Since: 25 Sep 2015
Location: Cheshire
Posts: 3693

Hello

Thanks for this,

The idea is to cut the reverse part of the lever off and then fit a on / off / on switch to engage reverse.

I'm not idea how to do this yet... However I've started making the pedal to make it go and The dashboards looking something like...

Click image to enlarge

then the pedal...

Click image to enlarge

so the switch I have to engage reverse is like this, but how do I wire this to what would have been reverse on the handlebar (so the three wires coming out of the pedal mechanism.

Thanks

29th May 2018 11:19am

Stacey007

Member Since: 25 Sep 2015
Location: Cheshire
Posts: 3693

Can anyone help with how I wire this?

Thanks

30th May 2018 8:46pm

Bauwe

Member Since: 10 Mar 2024
Location: Gelderland
Posts: 1

Accelerater form mobility scooter

Hello everyone,

I am currently building a Toylander 90. I would also like to use a normal foot pedal where I can select the reverse position with a switch, can you help me with this? It has already been discussed above, but can you explain it a little more or go into it a little deeper? I use potentiometer with 3 connections.

Friendly thanks

10th Mar 2024 12:33pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum