DEFENDER2.NET - View topic - Problems removing rear A Frame Ball Joint

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Problems removing rear A Frame Ball Joint

Page 1 of 1

Print this entire topic ·

Glyn D

Member Since: 11 Mar 2018
Location: North Wales
Posts: 6

Problems removing rear A Frame Ball Joint

Hi all, I posted a while back when I was about to buy my first Defender.

I went ahead and bought it, it's a 1996 300tdi Defender 90 and have tinkered with it almost every day since. Today's job is the rear A Frame ball joint but it's proving to be a bit difficult.

I've manage to free up most of the bolts with a big hammer. The problem I'm having now is that the ball joint thread is turning whilst I'm trying to undo the 30mm nut which secures it to the axle.

Any suggestions how to stop the ball joint from turning so that I can remove the nut?

26th May 2018 4:37pm

Chris86

Member Since: 15 Jul 2014
Location: South Yorks
Posts: 755

You'll be replacing the nut with new so you can just cut it with a grinder or split it with a chisel.

Chris

26th May 2018 5:13pm

Glyn D

Member Since: 11 Mar 2018
Location: North Wales
Posts: 6

Thanks Chris, I asked the same question on another forum and found a different solution which worked for me:

https://www.landyzone.co.uk/land-rover/pro...nt.331214/

26th May 2018 5:28pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum