DEFENDER2.NET - View topic - Wheel nuts & spacer nuts

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Wheels & Tyres > Wheel nuts & spacer nuts - torque settings?

Page 1 of 1

Print this entire topic ·

dunc

Member Since: 31 Dec 2015
Location: surrey
Posts: 132

2016 Defender 90 Puma 2.2 XS CSW Corris Grey

Wheel nuts & spacer nuts - torque settings?

There is probably a previous thread on this, but I can't find it.

I'm thinking of asking the local tyre fitters to fit a set of wheel spacers.

What torque setting should I ask them to tighten the nuts up to?
Is the torque setting the same for wheel and spacer nuts?

11th Feb 2018 10:06am

ericvv

Member Since: 02 Jun 2011
Location: Near the Jet d'Eau
Posts: 5816

2009 Defender 110 Puma 2.4 SVX Station Wagon Santorini Black

Wheels are 133Nm for the alloys or 170Nm for the HD Wolf rims.
No idea about spacers torque. Suggest you do a search on here with "wheel spacers" and see what people have written about them in the numerous threads. Not really unanimously good experience.
Eric You never actually own a Defender. You merely look after it for the next generation.
http://youtu.be/yVRlSsJwD0o
https://youtu.be/vmPr3oTHndg
https://www.youtube.com/watch?v=_GtzTT9Pdl0
https://www.youtube.com/watch?v=ABqKPz28e6A
https://www.youtube.com/watch?v=rLZ49Jce_n0
https://www.youtube.com/watch?v=XvAsz_ilQYU
https://www.youtube.com/watch?v=K8tMHiX9lSw
https://m.youtube.com/watch?v=dxwjPuHIV7I
https://vimeo.com/201482507
https://www.youtube.com/watch?v=ZSixqL0iyHw

11th Feb 2018 10:13am

Supacat

Member Since: 16 Oct 2012
Location: West Yorkshire
Posts: 11018

2013 Defender 110 Puma 2.2 XS DCPU Keswick Green

I'd hope any company selling spacers would give you the correct figures for whatever spacers you were looking at rather than go for figures that may suit other designs.

In fact, asking the question might help you sort some of the better suppliers/kit from the others...

11th Feb 2018 11:36am

bankz5152

Member Since: 02 Feb 2017
Location: South London/North Kent
Posts: 2057

170nm for spacers ideallt with a drop of thread lock but not 100% needed. 130mm for alloys.

11th Feb 2018 12:17pm

Jim1988

Member Since: 26 Oct 2017
Location: Derbyshire
Posts: 208

I just did mine the same as the wheels. And had no problems 👍🏻

11th Feb 2018 4:00pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum