DEFENDER2.NET - View topic - Clutch slave cylinder ,pipe/hose.

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > My Defender > Clutch slave cylinder ,pipe/hose.

Page 1 of 1

Print this entire topic ·

Bobbyg

Member Since: 05 Jan 2017
Location: Yorkshire
Posts: 26

1987 Defender 90 2.5 n/a Diesel PU Orkney Grey

Clutch slave cylinder ,pipe/hose.

Hi new to the site,my clutch has failed due to a leak in the pipe supply to the slave cylinder.it seams strange not to have a flex hose or braided hose for this link.has it been done or are there drawbacks to this.i would like to run a braided hose to replace the existing flex hose direct to the slave cylinder .i understand the pipe there is larger than brake pipe ie1/4 inch.anyone done this.
Thanks Bob

9th Sep 2017 10:39am

Bobbyg

Member Since: 05 Jan 2017
Location: Yorkshire
Posts: 26

Just been studying more photos of the clutch slave cylinder assembly.i see that my bracket supporting the pipe from the cylinder is mounted on the bulkhead ,where it should be on the slave cylinder mounting bolt.there by giving me the flex between body and slave cylinder.i need.
Bob

10th Sep 2017 3:49pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum