DEFENDER2.NET - View topic - Subwoofer extension cable

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > In Car Electronics > Subwoofer extension cable

Page 1 of 2

Print this entire topic ·

wyvern

Member Since: 14 Dec 2009
Location: Cornwall
Posts: 2070

2012 Defender 110 Puma 2.2 XS CSW Firenze Red

Subwoofer extension cable

Hi all
I have just added the under cubby heater box and heater, which all was fine, except that I have a factory fitted Alpine-branded Hi Line 150W low profile subwoofer on the back of the cubby box which has a bit of a stretch on the cable that is routed from the middle of the plate under the cubby.
Do you know where I can get an extension cable to allow the cable to be routed better with less stress...

I looked at cutting the cable and fitting longer wires but I don't trust my soldering skills !!

Click image to enlarge Poppy - TDCI (Puma) 110XS 2.2 - Camper conversion - see the build here - https://www.defender2.net/forum/topic56530.html
Elgar -TDCI(Puma) 110XS Dormobile - now sold
Devon & Cornwall 4x4 Response - DC126

10th Aug 2017 11:11am

mk1collector

Member Since: 17 Sep 2009
Location: West Yorkshire
Posts: 6769

Take it to an auto electrician to extend the cable, he should have all the correct coloured wires and you know the job is done properly. I don't think anywhere does an extension. Ray
My build thread
http://www.defender2.net/forum/topic17615.html

10th Aug 2017 11:24am

wyvern

Member Since: 14 Dec 2009
Location: Cornwall
Posts: 2070

^^^^ .... living in the paradise of remote north cornwall that may prove to be an adventure !!

It is an option and may be the route I'll have to take, but looking for a KISS approach first

Poppy - TDCI (Puma) 110XS 2.2 - Camper conversion - see the build here - https://www.defender2.net/forum/topic56530.html
Elgar -TDCI(Puma) 110XS Dormobile - now sold
Devon & Cornwall 4x4 Response - DC126

10th Aug 2017 11:48am

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11240

2013 Defender 110 Puma 2.2 USW Orkney Grey

Could you drill a new hole in a more useful position in the plate under the cubby to give you a bit more flexibility? Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

10th Aug 2017 12:32pm

MadTom

Member Since: 10 Sep 2013
Location: Olomouc
Posts: 572

Buy a decent soldering iron, some extra wire and learn yourself wire soldering. I was teaching 10 years old children how to do it. Normally it took the one day to learn, so it is really not difficult.
These wires are the right size for easy soldering.
And don´t forget to use heatshrinking tubes for isolating the joints and for mechanical protecting them. "Drobek" = The Small One - Discovery 2, "BlufÃnek" = The Blue Thing - Defender 130, and for me at least Ford Mondeo

10th Aug 2017 12:41pm

wyvern

Member Since: 14 Dec 2009
Location: Cornwall
Posts: 2070

LandRoverAnorak wrote:
Could you drill a new hole in a more useful position in the plate under the cubby to give you a bit more flexibility?

Sadly not - I looked at doing this first, however the new 'under cubby heater box and heater' raise the cubby box up about 4 inches, and position the Woofer higher and further back than its original location so requiring the cable to be moved from the centre of the old under cubby plate to the side then feed round the underside of the new plate to reach the woofer...

Click image to enlarge

MadTom wrote:
Buy a decent soldering iron, some extra wire and learn yourself wire soldering. ....

Tom, looked at that too as an option but this is a simple fix if there is a cable available and more likely to last longer than my attempt of soldering and then burying the cable under the new heater and associated fittings ! - it may still be the best option but not my most favoured! Poppy - TDCI (Puma) 110XS 2.2 - Camper conversion - see the build here - https://www.defender2.net/forum/topic56530.html
Elgar -TDCI(Puma) 110XS Dormobile - now sold
Devon & Cornwall 4x4 Response - DC126

10th Aug 2017 12:55pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 19568

See if the plug has any identification on it.
You may be able to get male and female versions and make your own extension loom.
Without having to cut the standard loom.

It's common enough to do for relocation and leaves OE harnesses in-tact as factory fit. Diesel$ Live$ Matter. â›½ï¸ðŸ›¢ï¸ðŸ‘¨â€ðŸ”§ðŸ§°âš™ï¸ RED, WHITE & BOOST! ðŸ‡¬ðŸ‡§

10th Aug 2017 2:30pm

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6480

2015 Defender 90 Puma 2.2 XS CSW Montalcino Red

Drop PaulMc a line and see if he has IDd it

1988 90 Td5 NAS soft top

2015 D90 XS SW

10th Aug 2017 2:54pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 19568

^^^^ My thoughts too.

Its not one I recognise off the top of my head but I'm damn sure there is likely something in the market that mates with it. Diesel$ Live$ Matter. â›½ï¸ðŸ›¢ï¸ðŸ‘¨â€ðŸ”§ðŸ§°âš™ï¸ RED, WHITE & BOOST! ðŸ‡¬ðŸ‡§

10th Aug 2017 3:27pm

wyvern

Member Since: 14 Dec 2009
Location: Cornwall
Posts: 2070

Cool ! I’ll take a proper picture of it when I get home again and see what he thinks .. meanwhile the tame electrical person on my platform is going to give me a crash course on crimping and then setting me up to cut out the connector block all together and use bullet connectors, heat shrink and have as long a lead as needed, with out the possibility of me melting the thing !!
so something to try and a new skill to learn - rather than my ‘bodging’ squash and hope that I do at the moment ! Poppy - TDCI (Puma) 110XS 2.2 - Camper conversion - see the build here - https://www.defender2.net/forum/topic56530.html
Elgar -TDCI(Puma) 110XS Dormobile - now sold
Devon & Cornwall 4x4 Response - DC126

10th Aug 2017 4:59pm

PaulMc

Member Since: 17 Jan 2009
Location: Kent
Posts: 486

The connector is from the Yazaki YESC Kaizen series.

The male connector is available from Land Rover, without terminals, as YPC804550

The female connector is not available from Land Rover.

I have both the male and female connectors with terminals, and could make an extension cable.

. Paul.
1989 Arles Blue 2.5TD 110 Hardtop
1999 Epsom Green Discovery II 4.0 V8i 'XS'

10th Aug 2017 6:27pm

wyvern

Member Since: 14 Dec 2009
Location: Cornwall
Posts: 2070

^^^ Wooohoooooo !!!
do you have a possible round about cost of an extension that is about 18 inches long ... ??? Poppy - TDCI (Puma) 110XS 2.2 - Camper conversion - see the build here - https://www.defender2.net/forum/topic56530.html
Elgar -TDCI(Puma) 110XS Dormobile - now sold
Devon & Cornwall 4x4 Response - DC126

10th Aug 2017 7:12pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 19568

Nice one Paul.

Diesel$ Live$ Matter. â›½ï¸ðŸ›¢ï¸ðŸ‘¨â€ðŸ”§ðŸ§°âš™ï¸ RED, WHITE & BOOST! ðŸ‡¬ðŸ‡§

10th Aug 2017 7:23pm

CarlinAbz

Member Since: 15 Sep 2013
Location: Aberdeenshire
Posts: 76

2013 Defender 90 Puma 2.2 XS CSW Corris Grey

I am also interested in an extension cable as looking to install the same cubby box. Apologies if you were doing someone a favour.....but if you are making them can you give me an idea of cost? Many thanks Carl.

22nd Sep 2017 8:52pm

wyvern

Member Since: 14 Dec 2009
Location: Cornwall
Posts: 2070

Hi Carl
Sadly I was unsuccessful in finding an extension cable
So am now going to extend each cable individually by about a foot, and use crimp joints on the lower cable to the connection and feed it though a new hole that I will drill into the bottom pate of the heater.

Ill let you know how I get on (wish me luck!)

22nd Sep 2017 9:31pm

Page 1 of 2

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum