Home > Puma (Tdci) > Centre console illumination loom |
|
|
zsd-puma Member Since: 09 Aug 2016 Location: Kent Posts: 2720 |
It comes as part of the heater controls i believe.
|
||
4th May 2017 1:35pm |
|
Martin Site Admin Member Since: 02 Apr 2007 Location: Hook Norton Posts: 6479 |
As above I think it's all part of the dash loom. 1988 90 Td5 NAS soft top
2015 D90 XS SW |
||
4th May 2017 1:37pm |
|
Yannis Member Since: 02 Feb 2015 Location: Oxfordshire / Milan Posts: 402 |
Is it possible just to buy the little holders;
Click image to enlarge I guess buying the whole loom will cost £££. My problem is that I smashed a holder removing the bulb... |
||
4th May 2017 4:28pm |
|
dorsetsmith Member Since: 30 Oct 2011 Location: South West Posts: 4554 |
Part of the Centre console any maker name on it
|
||
4th May 2017 8:14pm |
|
blackwolf Member Since: 03 Nov 2009 Location: South West England Posts: 16865 |
It comes (only) as part of the heater control panel, which is absurdly expensive. Your best bet would probably be a breaker.
I imagine that the bulb holder is probably an industry standard part. |
||
4th May 2017 8:17pm |
|
zsd-puma Member Since: 09 Aug 2016 Location: Kent Posts: 2720 |
What is wrong with the holders are they melted? or just bulbs loose in them?
If they're just loose prise the contacts up a bit on the bulbs. |
||
4th May 2017 8:53pm |
|
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis