DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Winch install

Page 3 of 3

Print this entire topic ·

miker

Member Since: 13 Sep 2015
Location: Surrey
Posts: 1758

I've used one of the ebay hydraulic crimpers and while they're not perfect, they do work pretty well. THe main issue with them is the dies. The machining on them isn't perfect, and sometimes you have to go up or down a size from what you think to get a good crimp.

For winch cables (larger) i'd look at the H-type hydro crimpers over the C-type you've linked there.

Generally I prefer a hex crimp over an indent crimp, though both are valid.

I think the only reason I miss my old job is being able to borrow their klauke battery hydraulic crimper, with dies from 10mm up to 300!!!

25th Apr 2017 4:58pm

Miggit

Member Since: 09 Mar 2017
Location: Milton Keynes
Posts: 72

Like this? http://www.ebay.co.uk/itm/16-Ton-Hydraulic...543f5f7e0c RRC 2.4 TD... it's either a stretched 90 or shrunken 110!!
ML 270CDI

25th Apr 2017 5:59pm

Harry.O

Member Since: 25 Jul 2014
Location: Warwickshire
Posts: 704

I have one of those 16ton eBay specials and so far it's worked well for winch cables.

26th Apr 2017 8:58am

Miggit

Member Since: 09 Mar 2017
Location: Milton Keynes
Posts: 72

RRC 2.4 TD... it's either a stretched 90 or shrunken 110!!
ML 270CDI

26th Apr 2017 9:15am

Miggit

Member Since: 09 Mar 2017
Location: Milton Keynes
Posts: 72

LOOK!!!!!

http://www.ebay.co.uk/itm/252812221281?_tr...EBIDX%3AIT

I've taken a gamble for less than the cost of a round at the pub

RRC 2.4 TD... it's either a stretched 90 or shrunken 110!!
ML 270CDI

26th Apr 2017 9:22am

pannawonica

Member Since: 21 Nov 2010
Location: Clackline Western Australia
Posts: 568

Miggit, from the looks I would say I have the identical tool! The dies are a bit rough and I ended up usiing 35mm on 53mm cable

However it actually works quite well that being said

I have done quite a few little jobs with it and it's going strong, it Evan came with replacement seals. Yes I could of purchased I CABAC or similar as I generally go for things that last! The reality it would have for me been unnessarary expenditure!

27th Apr 2017 12:57am

Page 3 of 3

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum