DEFENDER2.NET - View topic - stock pump settings or as close as ?

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Tdi > stock pump settings or as close as ?

Page 1 of 1

Print this entire topic ·

jonnytatt

Member Since: 04 Jun 2015
Location: Oldham
Posts: 37

stock pump settings or as close as ?

Hello

I'm after putting my pump back to stock.. Previous owner had fettled but not very well now I want to re do it.

After the relief of seeing the plastic cap Is still on the main mix screw I was wondering if I could stock the star wheel under the diaphram . I can find stock on the diaphram so that's no problem , but surely there must be a way to determine how far down the shaft the star wheel sits .

Can any one also tell me what soley adjusting the star wheel on a stock pump would do? Bring boost in quicker and lower in RPM?

6th Oct 2015 8:52am

K9F

Member Since: 12 Nov 2009
Location: Bournemouth
Posts: 9610

2008 Defender 90 Puma 2.4 XS CSW Stornoway Grey

7mm standard or 3mm after tweaking I think may be the figures you may be after? There are comprehensive details with photographs how to tune 200 and 300 TDIs below on a link I posted elsewhere. This may give you an idea how to roll it back perhaps or get it how you want it to run? Good luck.

http://www.landroverblogger.com/land-rover-tdi-tuning-200-300-tdi If you go through life with your head in the sand....all people will see is an ar5e!!

Treat every day as if it is your last....one day you will be right!!

6th Oct 2015 8:59am

jonnytatt

Member Since: 04 Jun 2015
Location: Oldham
Posts: 37

Thanks K9F from reading that would you say the 7mm is meaning the underside edge of the top cover once it's sprung up?

6th Oct 2015 9:56am

K9F

Member Since: 12 Nov 2009
Location: Bournemouth
Posts: 9610

That is how I read it!

Either way if you take careful measurements and mark things up yourself before 'fettling' you will be able to revert back to where you are now and be no worse off. If you go through life with your head in the sand....all people will see is an ar5e!!

Treat every day as if it is your last....one day you will be right!!

6th Oct 2015 10:07am

jonnytatt

Member Since: 04 Jun 2015
Location: Oldham
Posts: 37

True cheers mate

6th Oct 2015 10:27am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum